[Amps] Solid State Amps: 1500 watts is cheap if . . .

To:	<amps@contesting.com>
Subject:	[Amps] Solid State Amps: 1500 watts is cheap if . . .
From:	cloutier at bicnet.net (Steve Cloutier, 978-597-3311)
Date:	Tue Mar 4 01:19:49 2003

. . . you don't need to run SSB.

An HF class E transmitter running 1500 watts CW, FM or AM can be built 
using MOSFETs costing $2.50 each.

I havn't used a tube amplifier for quite some time now, and everything's 
homebrew.

Check out the class E web site at:  http://www.classeradio.com

Regards,

Steve

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] hear hear about the toobs, (continued) [Amps] hear hear about the toobs, Tom Rauch [Amps] Why hasn't solid state replaced tubes?, Pete Smith [Amps] Why hasn't solid state replaced tubes?, Tom Rauch [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski [Amps] Why hasn't solid state replaced tubes?, Tom Rauch [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski [Amps] Why hasn't solid state replaced tubes?, Merv Schweigert [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski [Amps] Why hasn't solid state replaced tubes?, Tom Rauch [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski [Amps] Solid State Amps: 1500 watts is cheap if . . ., Steve Cloutier, 978-597-3311 <= [Amps] Solid State Amps: 1500 watts is cheap if . . ., George K. Watson [Amps] hear hear about the toobs, 2

Previous by Date:	[Amps] 8877s, ETO and the General Electric Contract, Dave Haupt
Next by Date:	[Amps] 8877 failures and GE Medical, peter.chadwick@Zarlink.Com
Previous by Thread:	[Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski
Next by Thread:	[Amps] Solid State Amps: 1500 watts is cheap if . . ., George K. Watson
Indexes:	[Date] [Thread] [Top] [All Lists]