>Bias should be about -30 volts. I would not run the tube at 6500 Vp .
Why not, Norm?
>The Eimac specs for this tube show 6500 as the MAX .
>Your Idle current is about right.
>
>Norm N8NH
>
>
>At 01:10 AM 3/1/03 -0500, you wrote:
>>Does anyone have a ballpark figure of bias voltage for this tube. Im
>>running about 6500volts on the plate. I had some figures saved on a floppy
>>but cant find it. Does 20-25 volts sound about right? The amp is for SSB
>>use. Whats a good ZSAC 300-400mils.
>>Jeff KD4LYH
>
>
>>---
>>Outgoing mail is certified Virus Free.
>>Checked by AVG anti-virus system (http://www.grisoft.com).
To: <amps@contesting.com>
>>Version: 6.0.459 / Virus Database: 258 - Release Date: 2/25/03
>>_______________________________________________
>>Amps mailing list
>>Amps@contesting.com
>>http://lists.contesting.com/mailman/listinfo/amps
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
- R. L. Measures, a.k.a. Rich..., 805.386.3734, AG6K,
www.vcnet.com/measures.
end
|