Search the web for gs35 and gs31, you will find several pages that show
different ways to mount the grid to the chassis.
Art
KB7WW
Larry Kayser wrote:
>
> Greetings:
>
> I am considering building this amplifier for a project here. The available
> information is a little light on the design of the mounting ring assembly
> for the Grid. I would like to get in touch with someone who has built one
> of the PA3CSG design and has direct knowledge of a working design for the
> grid mounting assembly. The assembly looks like two plates with four
> aluminum standoffs providing about 1 cm or 3/8 of an inch for the air
> flow. The PA3CSG documentation is not clear (to me in any case) on the
> exact design to use for the grid mount.
>
> If anyone has additional information on this subject please get in touch
> via direct email.
>
> If there is a better forum for this inquiry I would also appreciate that
> information as well.
>
> Larry
> VA3LK
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
|