[Amps] Too much filtering

To:	<amps@contesting.com>
Subject:	[Amps] Too much filtering
From:	no9z@soltec.net (Lynn)
Date:	Thu, 07 Mar 2002 09:48:26 -0600

Hello,

     Interesting discussion on glitch resistors...
    I have a HV ps with 10   1800 uf  @ 450 volt filter caps.     So I
am assuming that the total capacitance for the B+ is  180UF

   Question
    I am using a variac to bring the HV up to 3000 vdc slowly.  Is this
too much capacitance for a stepstart circuit?   Diodes are  2  k2aw in
parallel in each leg of
a centertapped configuration.  The transformer is capable of at least 1
amp.

   I am using a 50 ohm 50 watt wirewound for protection after the
capacitors.

Lynn, NO9Z

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] Too much filtering, Lynn <= [Amps] Too much filtering, Richard [Amps] Too much filtering, Radio WC6W

Previous by Date:	[Amps] FS: Glitch resistors, Radio WC6W
Next by Date:	[Amps] Too much filtering, Richard
Previous by Thread:	[Amps] FS: Glitch resistors, Radio WC6W
Next by Thread:	[Amps] Too much filtering, Richard
Indexes:	[Date] [Thread] [Top] [All Lists]