--part1_15f.467152.28c5609d_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Hello All,
I have another question.
This time about the 3CX800A7 Tube. What is the maximum allowable Plate
Current of a 3CX800A7 Tube ?? Can it be operated at 600 ma without
degradation or damage ??? The reason for asking is because my notes show
typical plate current at 500 ma. I notice hat I can further the output
(another 100 - 125 watts) by going to abt 600 ma but worry about tube
degradation / distortion / or signal purity when running close to tube
saturation.
Jeff K7XQ
--part1_15f.467152.28c5609d_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
<HTML><FONT FACE=arial,helvetica><BODY BGCOLOR="#ffffff"><FONT SIZE=2>Hello
All,
<BR> I have another question.
<BR>
<BR>This time about the 3CX800A7 Tube. What is the maximum allowable Plate
<BR>Current of a 3CX800A7 Tube ?? Can it be operated at 600 ma without
<BR>degradation or damage ??? The reason for asking is because my notes show
<BR>typical plate current at 500 ma. I notice hat I can further the output
<BR>(another 100 - 125 watts) by going to abt 600 ma but worry about tube
<BR>degradation / distortion / or signal purity when running close to tube
<BR>saturation.
<BR>
<BR>Jeff K7XQ
<BR>
<BR></FONT></HTML>
--part1_15f.467152.28c5609d_boundary--
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|