This is a multi-part message in MIME format.
------=_NextPart_000_0007_01C0DA52.67D29000
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi All,
I am building a monoband amp and I would ask for advice as to which is =
the best configuration Full Bridge or Voltage doubler. Does one perform =
better than the other ,or is it just down to personal preference ?? Also =
should I use a torroid or conventional transformer which is prefered.
Power will be around 4Kv off load max current 1 amp using 240 volt UK =
mains single phase primary to power a GS35B for 50 Mhz.
Thanks=20
Stephen G7euw
------=_NextPart_000_0007_01C0DA52.67D29000
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2614.3500" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hi All,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I am building a monoband amp and I =
would ask=20
for advice as to which is the best configuration Full Bridge or Voltage =
doubler.=20
Does one perform better than the other ,or is it just down to personal=20
preference ?? Also should I use a torroid or conventional transformer =
which is=20
prefered.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Power will be around 4Kv off load =
max current=20
1 amp using 240 volt UK mains single phase primary to power a GS35B for =
50=20
Mhz.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Thanks </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Stephen =
G7euw</FONT></DIV></BODY></HTML>
------=_NextPart_000_0007_01C0DA52.67D29000--
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|