Johan Nordin wrote:
>
>Currently building a g-g amp on 2m with a GS35b
>
>There are several schematics floating around for
>this device including construction of RF chokes
>for filament and HT etc...
>I was thinking of making chokes of quarterwaves of thin
>coax, (grounded with respect to RF at the far end of the tube).
>Would like to try it at least as filament chokes instead of
>bifilar windings.
>The length of the cables will not be so long at VHF/UHF
>and it would be easy and quick to make theese RF chokes
>on any VHF/UHF frequency ( For thoose of us who are not familiar
>with calculations with the traditional designs).
>
>Just a thought, good or bad?
Sure, it works fine. UT141 semi-rigid is OK at these currents, and you
do not need a quarter-wave if you wind it into a coil.
73 from Ian G3SEK Editor, 'The VHF/UHF DX Book'
'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.com/g3sek
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|