Well, I never had an N to fail yet, except if water gets
in it will fry at once, but then again almost anything will
fry when water gets in.
However, nowdays I started to use 7/16 connectors on
HF and VHF/UHF also for that matter. One sure will sleep
safely with 7/16 connectors in the system.
73, Jim SM2EKM
------------------------------------
-----Ursprungligt meddelande-----
Från: i4jmy@iol.it [SMTP:i4jmy@iol.it]
Skickat: den 20 november 2000 22:38
Till: k6uj@pacbell.net; amps@contesting.com
Ämne: Re: [AMPS] Hi Power Connectors
It depends by frequency and duty cycle.
Professionally, PL259 is not considered at all, while N is not
considered as
an Hi power connector.
73,
Mauri I4JMY
----- Original Message -----
From: "k6uj" <k6uj@pacbell.net>
To: <amps@contesting.com>
Sent: Monday, November 20, 2000 6:14 PM
Subject: [AMPS] Hi Power Connectors
>
> Hi All,
>
> I have been searching the archives to find something on the actual
> voltage/power rating
> of Pl-259's and type N connectors. Anyone know where actual
specifications
> might be found ?
>
>
> 73,
>
> Bob, K6UJ
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
<<Fil: Re_ [AMPS] Hi Power Connectors.TXT>>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|