The relay in 30S1 is very bad old design. Probably the springs in the relay are
worn out. The only reasonable thing to do is to replace it.
73 !
Jiri OK1RI
>thanks for reading this e-mail. has any one had problems with the
antenna
>change over relay in a collins 30-s1 amp? i have cleaned mine with relay
>contact cleaner and electronic cleaner spray and still have a problem. the
>contacts are arcing causing the output to drop and screen current to rise.
makes sense
>
>any body repalced it with a vacuam relay ?
>thanks , 73 ed n4ek
>
What is the transceiver being used with the 30s-1, Ed?
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|