Amps
[Top] [All Lists]

[AMPS] tube compatability

To: <amps@contesting.com>
Subject: [AMPS] tube compatability
From: km1h@juno.com (km1h @ juno.com)
Date: Fri, 21 Nov 1997 08:21:05 EST
On Thu, 20 Nov 1997 14:52:46 -0700 al511@freenet.uchsc.edu (Robert Neece)
writes:
>
>
>With respect to 3CX800A7's, and the like, Tom, W8JI, writes:
>
>>Be sure to add a grid over-current protection circuit to your amp, if 
>
>>it does not have one, or you will eat up tubes.
>>
>>A fuse is NOT enough, nor is a warning light.  You need something 
>that 
>>quickly knocks the [name your amp] off line if the Ig ever gets over
>>[name your maximum comfort level] mA... even for a brief instant.
>
>Agreed.
>
>My copy of Bill Orr's Radio Handbook shows one version of a grid 
>over-current protection circuit designed, as I recall, by W8ZR.  
>Some years ago, a fellow (might have been ZR) was selling 
>printed-circuit
>boards for his own flavor of circuit.  

W8ZR's was an 8877, that Orr Handbook circuit has also been updated by ZR
( Prez of Miami University) but not published.
The 3CX800 circuit you're thinking of may the one in HRM by K8CC. That
circuit had a complete set of boards available from Radiokit for many
years. The boards are probably still available from FAR Circuits. 

GL   Carl   KM1H



>
>What's the latest wisdom on creating a suitable circuit?  Any source
>of PC boards or other short cuts to getting the job done?
>
>73 de Bob, K0KR
>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>