- 1. Topband: Using old 1/2 inch Comscope hardline for my 4-square (score: 1)
- Author: terry burge <ki7m@comcast.net>
- Date: Mon, 25 Jun 2018 22:07:47 -0700 (PDT)
- Hi guys and gals, W9XT came up with a way to connect a PL-259 to a 1/2" hardline. Since I find the Comscope 1/2" hardline I got a whole 4' spool of is not even listed by comscope or any of the manufa
- /archives//html/Topband/2018-06/msg00122.html (8,840 bytes)
- 2. Re: Topband: Using old 1/2 inch Comscope hardline for my 4-square (score: 1)
- Author: Grant Saviers <grants2@pacbell.net>
- Date: Tue, 26 Jun 2018 11:08:37 -0700
- Have you tried an SFX-500 connector? These are made for 1/2" bare Al hardline, 50 ohm but the 75 ohm center conductor should be smaller diameter. With a steppIR beam a broadband match is needed which
- /archives//html/Topband/2018-06/msg00125.html (10,469 bytes)
- 3. Topband: Using old 1/2 inch Comscope hardline for my 4-square (score: 1)
- Author: Dick Bingham <dick.bingham@gmail.com>
- Date: Tue, 26 Jun 2018 19:15:38 -0700
- Greetings All Where Terry Burge posted ==> == Message: 1 Date: Mon, 25 Jun 2018 22:07:47 -0700 (PDT) From: terry burge <ki7m@comcast.net> To: topband@contesting.com, terry burge <ki7m@comcast.net> Su
- /archives//html/Topband/2018-06/msg00127.html (10,413 bytes)
This search system is powered by
Namazu