Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Topband\:\s+Skin\s+effect\s+on\s+RG6U\s+at\s+top\s+band\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Topband\:\s+Skin\s+effect\s+on\s+RG6U\s+at\s+top\s+band\s*$/: 3 ]

Total 3 documents matching your query.

1. Topband: Skin effect on RG6U at top band (score: 1): Author: jeremy maris <jeremy@maris.plus.com>; Date: Mon, 31 Jan 2011 10:19:15 +0000; We've used 1 km of coax to feed a remote Beverage (3 wavelength, 60 degrees, for VK and far east). 750m of the coax is RG6U, with copper braid. The results were poor, despite a 10dB head amplifier at; /archives//html/Topband/2011-01/msg00161.html (7,353 bytes)
2. Re: Topband: Skin effect on RG6U at top band (score: 1): Author: "ZR" <zr@jeremy.mv.com>; Date: Mon, 31 Jan 2011 10:57:34 -0500; CATV requirements start at 5MHz so I have my doubts that the cable is at fault. Ive heard a similar complaint from Australia with copper braid RG-6 so wonder if it is a non USA product problem. Maybe; /archives//html/Topband/2011-01/msg00164.html (9,762 bytes)
3. Re: Topband: Skin effect on RG6U at top band (score: 1): Author: "Bill Wichers" <billw@waveform.net>; Date: Mon, 31 Jan 2011 14:52:03 -0500; It is typical for the loss on the CCS (Copper Clad Steel) center conductor RG6 cables to be a bit higher than you'd expect at the low frequencies, but it's usually not super significant. For example,; /archives//html/Topband/2011-01/msg00167.html (9,039 bytes)

Current List: 1 - 3
Page: [1]