- 1. Topband: 259B (score: 1)
- Author: "Clive GM3POI" <gm3poi2@btinternet.com>
- Date: Mon, 12 Apr 2004 13:16:12 -0000
- Has any one come across the problem of a 259B showing on switch on 0.000mhz for frequency and is the same on all bands. Is there any form of master reset that I can try?. 73 Clive GM3POI ____________
- /archives//html/Topband/2004-04/msg00061.html (6,673 bytes)
- 2. Re: Topband: 259B (score: 1)
- Author: Paul Higginson <paul@greenrover.demon.co.uk>
- Date: Tue, 13 Apr 2004 21:13:00 +0100
- In message <006201c42094$69d93df0$0c887ad5@usero2cu908sdx>, Clive GM3POI <gm3poi2@btinternet.com> writes Has any one come across the problem of a 259B showing on switch on 0.000mhz for frequency and
- /archives//html/Topband/2004-04/msg00069.html (9,265 bytes)
- 3. Re: Topband: 259B (score: 1)
- Author: Hardy Landskov <n7rt@cox.net>
- Date: Tue, 13 Apr 2004 20:30:09 -0700
- Hi All, These products are manufactured under standards less than minimum commercial requirements. Take your chances...ie caveat emptor My experience....and my opinion. My 259B still works and keepin
- /archives//html/Topband/2004-04/msg00071.html (7,675 bytes)
- 4. Re: Topband: 259B (score: 1)
- Author: "Tom Rauch" <w8ji@contesting.com>
- Date: Wed, 14 Apr 2004 06:04:11 -0400
- I hate to tell you this but that calibration outline for setting bias is wrong. He probably copied that from MFJ, who off and on for years have calibrated antenna analyzer bias incorrectly. You must
- /archives//html/Topband/2004-04/msg00073.html (9,115 bytes)
- 5. Re: Topband: 259B (score: 1)
- Author: Paul Higginson <paul@greenrover.demon.co.uk>
- Date: Thu, 15 Apr 2004 12:17:17 +0100
- In message <019401c42207$d5a51da0$6801a8c0@akorn.net>, Tom Rauch <w8ji@contesting.com> writes There are several causes, the diagrams and calibration guide is available on the net. http://www.cqham.ru
- /archives//html/Topband/2004-04/msg00098.html (8,448 bytes)
This search system is powered by
Namazu