- 1. [Amps] Silver plated braid (score: 1)
- Author: "Bob Maser" <bmaser@tampabay.rr.com>
- Date: Tue, 20 Jan 2009 19:10:50 -0800
- I am need of about 3-4 feet of silver plated braid to make the connections between a toroid winding and the band selector switch. Something about 1/8" width. Can someone steer me to a supplier? Thank
- /archives//html/Amps/2009-01/msg00191.html (6,355 bytes)
- 2. Re: [Amps] Silver plated braid (score: 1)
- Author: <d.cutter@ntlworld.com>
- Date: Wed, 21 Jan 2009 10:41:09 +0000
- I think most (all) ptfe or Teflon insulated coax uses silver plated braid David G3UNA _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com
- /archives//html/Amps/2009-01/msg00193.html (7,187 bytes)
- 3. Re: [Amps] Silver plated braid (score: 1)
- Author: DAVE WHITE <mausoptik@btinternet.com>
- Date: Wed, 21 Jan 2009 12:22:36 +0000 (GMT)
- RG214/U usually has a double layer of silver plated braid - at least the stuff I have has. It's German Kamelmetal brand, bought on the fleamarket at Weinheim. cheers Dave G0OIL I think most (all) pt
- /archives//html/Amps/2009-01/msg00194.html (8,112 bytes)
- 4. Re: [Amps] Silver plated braid (score: 1)
- Author: "David C. Hallam" <dhallam@rapidsys.com>
- Date: Wed, 21 Jan 2009 07:59:48 -0500
- All Teflon insulated wire is silver plated. The high temperatures involved in Teflon extrusion would be detrimental to copper even if tin plated. David KC2JD/4 _______________________________________
- /archives//html/Amps/2009-01/msg00195.html (8,090 bytes)
- 5. Re: [Amps] Silver plated braid (score: 1)
- Author: "Carl" <km1h@jeremy.mv.com>
- Date: Wed, 21 Jan 2009 10:39:55 -0500
- Correct and its often a give away. In the US fire rules require it in commercial building air plenums and scrapped broadband networking cable shows up in the scrap yards. Carl KM1H __________________
- /archives//html/Amps/2009-01/msg00200.html (8,895 bytes)
- 6. Re: [Amps] Silver plated braid (score: 1)
- Author: "Alex Eban" <alexeban@gmail.com>
- Date: Thu, 22 Jan 2009 08:37:29 +0200
- ...why do you need silver plated braid? At these frequencies the copper conducts almost as well as silver plated metal! In a plate tank circuit the impedances are reasonably high, so that the few mil
- /archives//html/Amps/2009-01/msg00232.html (9,151 bytes)
This search system is powered by
Namazu