Hi Carl, I temprorary used 200m of CAT6 cable to connect two reversable Beverages - one direction per one pair few summers ago. Worked well. I used regular binocles from 73 material for transformers
None of Feb 4th TB QSO are in online log, must be about 1000. So we start our insurance QSO as encouraged on K1N page: work us again<< I have only that QSO and 0 in online log so there is no "mixed b
I see ZL3IX and N6TR both on TB in K1N clublog. All others too probably. You need to restart page or something. 73 Arunas LY2ij _________________ Topband Reflector Archives - http://www.contesting.co
There is new connector already widely used in cellular market - 4.3-10. Designed to get rid of Intermodulation problems - outer contact is torque independent. Size is +- same as N/ UHF connector, inn
Hi Frank, 4.3-10 can't be so expensive if compare new to new. E.g. 7/16 to 4.3-10 "brand" adapter bulk price is 10-15% higher than N to 7/16, also price of few meters prefabricated "jumper cables" wi
HI, Thanks for sharing experience! Question to FT8 and "noise" relations - In usual case everything in passband is noise except signal of interest. So with only one FT8 signal and white noise in pass
Hi Pete, Here is picture of coil I made to tune Inv. L at 9Y4 with 15-20 Ohm impedance. It was tuned in 2 steps: 1. calculate and wound coil to rise R close to 50 Ohm 2. adjust horizontal wire length
Hi Mike, I wanted to try and raised similar question in 2011: http://lists.contesting.com/archives//html/Topband/2011-04/msg00027.html It was some theoretical discussion but no practical experience,