Search String: Display: Description: Sort:

Results:

References: [ +from:w4tv@subich.com: 20 ]

Total 20 documents matching your query.

1. Re: [Yaesu] help me please (score: 1)
Author: "Joe Subich" <W4TV@subich.com>
Date: Wed, 4 Jan 2006 22:14:15 -0500
Miguel, The connector on the FL-7000 end is by Molex (check Digikey: www.digikey.com) - I do not know the specific model number. The connector on the FT-920 end is a DIN8/262 (The RF Connection www.t
/archives//html/Yaesu/2006-01/msg00009.html (7,884 bytes)

2. Re: [Yaesu] FT920 and filters. (score: 1)
Author: "Joe Subich" <W4TV@subich.com>
Date: Sun, 5 Feb 2006 22:52:39 -0500
Ryszard, Check with W2VJN at INRAD (www.inrad.net). George has filter switching and cascading boards that will allow you to add 1.8KHz and 250 Hz filters to the FT-920. With the added boards, you can
/archives//html/Yaesu/2006-02/msg00013.html (7,704 bytes)

3. Re: [Yaesu] FT-1000D firmware upgrade (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Thu, 22 Jun 2006 22:48:31 -0400
Jim, Which version of ROM does your FT-1000D use? Hold the 1.5 and 7 buttons while turning on the radio. This will perform the "Las Vegas" test and display the firmware version. Firmware version 6.0
/archives//html/Yaesu/2006-06/msg00046.html (9,112 bytes)

4. Re: [Yaesu] FT2000 (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Tue, 11 Jul 2006 16:03:29 -0400
Download the file(s) and save as "filename.pdf" the file will then open with Adobe Reader. 73, ... Joe, W4TV _______________________________________________ Yaesu mailing list Yaesu@contesting.com ht
/archives//html/Yaesu/2006-07/msg00017.html (9,057 bytes)

5. Re: [Yaesu] Cable (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Sat, 22 Jul 2006 09:39:12 -0400
Check with BuxComm: http://www.packetradio.com/MICimgs.html It looks like you could order one of their cables: "D M21" The M21 drawing is shown for the FT-990 (PKT and RTTY jacks) but it should also
/archives//html/Yaesu/2006-07/msg00055.html (7,468 bytes)

6. Re: [Yaesu] Yaesu Warranty on Used FT-897D? (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Sun, 6 Aug 2006 14:18:02 -0400
microHAM's warranty also attaches to the device not the owner. The only caveat is that the person seeking warranty service must have the original invoice to document the original sale date. 73, ... J
/archives//html/Yaesu/2006-08/msg00009.html (9,554 bytes)

7. Re: [Yaesu] FT-990 EPROMUpgrade (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Tue, 8 Aug 2006 00:14:37 -0400
The newer firmware (1.13) added the "short update" responses - in particular: 16 bytes of data (current operating parameters - command xx 00 00 02 10H) or 32 bytes of data (VFO A and VFO B - command
/archives//html/Yaesu/2006-08/msg00021.html (10,214 bytes)

8. Re: [Yaesu] fif-232c (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Tue, 29 Aug 2006 10:07:51 -0400
microHAM USB Interface II uses an FTDI USB -> serial chip with proprietary "Router" software to create multiple virtual serial ports (control, PTT, CW) for compatibility with most logging and CAT sof
/archives//html/Yaesu/2006-08/msg00044.html (9,351 bytes)

9. [Yaesu] For Sale (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Sat, 28 Oct 2006 00:39:37 -0400
I no longer have a FT-1000D so the following are surplus to my needs: Yaesu SP-5 w/Timewave DSP-599Y ......................... $350 Yaesu FIF-232C - RS-232 to TTL level converter (used) .. $45 Yaesu
/archives//html/Yaesu/2006-10/msg00013.html (6,826 bytes)

10. Re: [Yaesu] FT-1000 MK V Field (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Sun, 31 Dec 2006 00:34:14 -0500
It sounds like the seller had a CW filter in one of the IFs that was removed before he sold you the radio without resetting the filter selection menu. Without knowing what filters are still installed
/archives//html/Yaesu/2006-12/msg00028.html (8,401 bytes)

11. Re: [Yaesu] FT-1000/1000D question (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Fri, 8 Jun 2007 14:26:22 -0400
Check with International Radio Service Division - it was they, not INRAD, who made the tuning upgrader. They are still listed at: http://www.qth.com/irsd/mods-upgrades.html 73, ... Joe, W4TV ________
/archives//html/Yaesu/2007-06/msg00003.html (8,708 bytes)

12. Re: [Yaesu] FL2100 to 1000MP help (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Tue, 21 Aug 2007 09:24:47 -0400
Mike, All the information you need is on page 68 of the FT-1000MP manual. If you do not have the FT-1000MP manual, it is available from several placed including www.va3cr.net. 73, ... Joe, W4TV _____
/archives//html/Yaesu/2007-08/msg00016.html (7,794 bytes)

13. Re: [Yaesu] 990 question (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Wed, 7 Nov 2007 10:06:06 -0500
Not unless Yaesu can still update it in California. The firmware is built into the controller and an update requires a controller change. 73, ... Joe, W4TV __________________________________________
/archives//html/Yaesu/2007-11/msg00002.html (7,484 bytes)

14. Re: [Yaesu] FT990 spares ROM v1.3 :) (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Fri, 9 Nov 2007 15:14:44 -0500
The "ROM" in the FT-990 was integral to the controller. There is not any way, short of replacing the controller to upgrade to firmware 1.3 from an earlier version. At one time Yaesu USA still had con
/archives//html/Yaesu/2007-11/msg00010.html (8,832 bytes)

15. Re: [Yaesu] FT990 spares ROM v1.3 :) (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Fri, 9 Nov 2007 17:21:05 -0500
That's the information I had. I no longer have a FT-990 manual set to be able to independently confirm it but everyone that I know of who upgraded the FT-990 had to ship them to California for the u
/archives//html/Yaesu/2007-11/msg00012.html (11,751 bytes)

16. Re: [Yaesu] International Radio Service Division (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Mon, 17 Dec 2007 21:51:17 -0500
Unfortunate ... for others, IRSD's web site says they accept credit cards (Visa/Mastercard). The safest way to deal with vendors like this is using the credit card as you can always go back on the ca
/archives//html/Yaesu/2007-12/msg00015.html (8,608 bytes)

17. Re: [Yaesu] FT-1000D 500hz filter no receive (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Sun, 21 Sep 2008 11:41:01 -0400
There are two 500 Hz filters in the FT-1000D (2nd and 3rd IF). If either filter is bad or filter XF-E (XF-455K-501-01) has been removed there will be no output when 500 Hz is selected unless diode D
/archives//html/Yaesu/2008-09/msg00016.html (8,847 bytes)

18. Re: [Yaesu] FT-1000D band-info format on the 4 pins of the BAND DATAconnector? (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Sun, 12 Oct 2008 17:36:43 -0400
BCD .... 160=1, 80=2, 40=3, 30=4, 20=5, 17=6, 15=7, 12=8, 10=9, 6=10 (for FTV-1000/Quadra) _______________________________________________ Yaesu mailing list Yaesu@contesting.com http://lists.contest
/archives//html/Yaesu/2008-10/msg00007.html (8,142 bytes)

19. Re: [Yaesu] mp amp keying? (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Sun, 16 Nov 2008 11:59:12 -0500
David, The Band Data keying line should work fine. However, if you are getting "sticky" relays, that means the amplifiers have a significant back EMF spike when they are unkeyed (enough to generate a
/archives//html/Yaesu/2008-11/msg00006.html (8,701 bytes)

20. Re: [Yaesu] mp amp keying? (score: 1)
Author: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Sat, 22 Nov 2008 09:31:22 -0500
The connector is known as the DIN8/262. It's available at The RF Connection (www.therfc.com) and some of the larger parts houses (Mouser, Digikey, Newark). 73, ... Joe, W4TV _________________________
/archives//html/Yaesu/2008-11/msg00021.html (15,367 bytes)

Current List: 1 - 20
Page: [1]
This search system is powered by Namazu