- 1. Re: [Yaesu] FRG8800 (score: 1)
- Author: "Tim Moes" <tmoes@wat.midco.net>
- Date: Sun, 22 May 2005 10:29:55 -0500
- Hi Eric, The FRG-8800 flashing display does indicate PLL unlock and possibly a bad crystal or VCO that has failed. One thing you may try is to look at the VCO's on the Main board on the bottom of the
- /archives//html/Yaesu/2005-05/msg00007.html (7,979 bytes)
- 2. Re: [Yaesu] Soka 747 (score: 1)
- Author: "Tim Moes" <tmoes@wat.midco.net>
- Date: Tue, 7 Jun 2005 15:09:30 -0500
- Hi Erkki, The Yaesu FT-747 should be the same and you can find it at www.mods.dk . When you bring up the site click on the manuals on the right side of page to bring up list of manuals. There is a te
- /archives//html/Yaesu/2005-06/msg00008.html (7,748 bytes)
- 3. [Yaesu] FT-1000D birdie (score: 1)
- Author: "Tim Moes" <tmoes@wat.midco.net>
- Date: Mon, 27 Feb 2006 22:58:59 -0600
- Hi All, I have a FT-1000D that has birdies across the 160 meter band with the tuner on. If you disconnect the ant and tune across the band it comes in about every 17KC. With the tuner off the birdie
- /archives//html/Yaesu/2006-02/msg00037.html (6,401 bytes)
- 4. Re: [Yaesu] VFO Lock-Up (score: 1)
- Author: "Tim Moes" <tmoes@wat.midco.net>
- Date: Sun, 14 May 2006 09:59:41 -0500
- Hi Robert, When the Main dial usually gets tight and hard to turn it is the shaft seizing in the bushing of the encoder. Sometimes you can spray it with some silicone to loosen it up but it may need
- /archives//html/Yaesu/2006-05/msg00002.html (8,238 bytes)
- 5. Re: [Yaesu] FT920 half Power (score: 1)
- Author: "Tim Moes" <tmoes@wat.midco.net>
- Date: Tue, 19 Sep 2006 17:22:26 -0500
- Hi Tom, My experience with the Ft-920 is losing driver transistors when the power drops to 30-40 watts. If it is getting real hot you have a shorted MFF255 or the drivers which I think are a 2sc3133.
- /archives//html/Yaesu/2006-09/msg00015.html (7,578 bytes)
- 6. Re: [Yaesu] FT-1000D (score: 1)
- Author: "Tim Moes" <tmoes@wat.midco.net>
- Date: Tue, 30 Jan 2007 21:54:12 -0600
- Hi Norm, The diodes are the TX/RX diodes located on the RF unit. The diodes are D1005 and D1006. They are now replaced with a 11ES1 diode. TNX.... Tim wd0fkc www.midwest-technical.com _______________
- /archives//html/Yaesu/2007-01/msg00010.html (7,704 bytes)
- 7. Re: [Yaesu] ft 757 gx-II problem (score: 1)
- Author: "Tim Moes" <tmoes@wat.midco.net>
- Date: Wed, 14 Feb 2007 12:06:14 -0600
- Wayne, I saw your post and this is ususlly a common symptom the Ft-757 has when you lose the TX/RX switching diodes. The receiver will usually become noisy also. The diodes are located on the RF unit
- /archives//html/Yaesu/2007-02/msg00020.html (7,967 bytes)
- 8. Re: [Yaesu] Yaesu Parts availability (score: 1)
- Author: "Tim Moes" <tmoes@wat.midco.net>
- Date: Thu, 15 Feb 2007 21:30:55 -0600
- Jim, I have also received information today that the output FET for the FT-100 for VHF/UHF (SRF7043) is not available and Yaesu does not plan to restock it. I do think Yaesu needs some pressure to su
- /archives//html/Yaesu/2007-02/msg00030.html (10,570 bytes)
This search system is powered by
Namazu