Mail Archive Search: <+from:K5XS@aol.com>

Results:

References: [ +from:K5XS@aol.com: 15 ]

Total 15 documents matching your query.

1. [Yaesu] vx-1r (score: 1): Author: K5XS@aol.com (K5XS@aol.com); Date: Mon Jun 30 16:43:11 2003; Alan, I would check power source before doing anything else. Are you running on an internal battery, or a wall-wart/vehicular adapter? If an internal battery, I would check the contacts for corrosion; /archives//html/Yaesu/2003-06/msg00063.html (6,846 bytes)
2. [Yaesu] Contact with Yaesu USA (score: 1): Author: K5XS@aol.com (K5XS@aol.com); Date: Fri, 13 Dec 2002 15:49:07 -0500; Vince, I have had poor success with e-mail, but great success on the phone. Bernie; /archives//html/Yaesu/2002-12/msg00021.html (6,505 bytes)
3. [Yaesu] Yaesu FT50R Question... (score: 1): Author: K5XS@aol.com (K5XS@aol.com); Date: Tue, 27 Aug 2002 10:55:19 -0400; That behavior is consistent with a dead battery. The charger does not provide enough current to transmit (I suppose it might if you configure the low power setting for its lowest value). A new batter; /archives//html/Yaesu/2002-08/msg00010.html (7,842 bytes)
4. [Yaesu] VX-1 Freq Tweak (score: 1): Author: K5XS@aol.com (K5XS@aol.com); Date: Sun, 15 Jul 2001 22:16:17 EDT; Can anyone please tell me how to adjust the master oscillator in a VX-1R? Mine just spontaneously jumped in frequency. Now when I set the operating frequency to 146.52 MHz, I am actually transmitting; /archives//html/Yaesu/2001-07/msg00011.html (6,800 bytes)
5. Re: [Yaesu] Please Don't Butcher the name: Yaesu Musen Co. (score: 1): Author: K5XS@aol.com; Date: Sun, 30 May 2004 14:40:13 EDT; Carol, Thanks for the education. I am happy to report I had been pronouncing it apparently correctly all these years, but I did not know Musen meant "wireless." How cool is that! (I will point out th; /archives//html/Yaesu/2004-05/msg00019.html (10,157 bytes)
6. Re: [Yaesu] Yaesu FT-101EE Repair info...........!!!!! (score: 1): Author: K5XS@aol.com; Date: Thu, 17 Jun 2004 08:10:07 EDT; Alex, I would first remove all the vacumn tubes, circuit boards, and connectors and clean them very carefully with an appropriate compound. I would then do the same for the rotary switches. I suspect; /archives//html/Yaesu/2004-06/msg00015.html (6,807 bytes)
7. Re: [Yaesu] Yaesu FT50 question (score: 1): Author: K5XS@aol.com; Date: Sat, 8 Jan 2005 19:26:40 EST; John, Yes it can. Make sure it is in VFO mode, with one desired frequency in one VFO, another in the other VFO. Tap the "F" key and then the # key. That puts it in "Dual Watch" mode, real time dual r; /archives//html/Yaesu/2005-01/msg00013.html (6,945 bytes)
8. Re: [Yaesu] Service-Repair (score: 1): Author: K5XS@aol.com; Date: Wed, 8 Jun 2005 11:35:56 EDT; Norm, I can't vouch for any of the comments, and you will likely need to filter through a good bit of emotionalism, but the following link on _www.eham.net_ (http://www.eham.net) may give you some in; /archives//html/Yaesu/2005-06/msg00013.html (8,210 bytes)
9. [Yaesu] 1000D Bad Processor (score: 1): Author: K5XS@aol.com; Date: Sat, 21 Jan 2006 12:28:03 EST; Paul, I've heard the same thing. I think your best bet is finding one with a dead RF section that you can cannibalize. That's one reason that amid all my Icom/Kenwood/Yaesu gear I've got an old (now); /archives//html/Yaesu/2006-01/msg00037.html (6,685 bytes)
10. Re: [Yaesu] Looking For (score: 1): Author: K5XS@aol.com; Date: Sun, 22 Jan 2006 20:36:39 EST; Graham, For what model Yaesu? Bernie K5XS In a message dated 1/22/2006 4:27:51 PM Central Standard Time, gshortre@telus.net writes: I'm looking for the carrying handle, complete with the attaching ha; /archives//html/Yaesu/2006-01/msg00046.html (6,400 bytes)
11. Re: [Yaesu] Yaesu Parts availability (score: 1): Author: K5XS@aol.com; Date: Thu, 15 Feb 2007 17:28:39 EST; I love my Yaesu equipment, and I have a good bit of it. But I marvel at the contrast between their logistics support to the end user and Ten-Tec's. To be sure, Ten-Tec runs out of parts for older equ; /archives//html/Yaesu/2007-02/msg00029.html (7,177 bytes)
12. [Yaesu] FT-897D Solar Power? (score: 1): Author: K5XS@aol.com; Date: Sat, 17 Feb 2007 13:42:31 EST; Has anyone used a solar panel to charge the internal batteries on an FT-897D? I would be interested in learning what I can about it. Thanks & 73, Bernie K5XS _________________________________________; /archives//html/Yaesu/2007-02/msg00031.html (6,118 bytes)
13. Re: [Yaesu] VX-170 Squelch modes (score: 1): Author: K5XS@aol.com; Date: Wed, 21 Mar 2007 14:27:39 EDT; Tim, The operating manual is available for download here: _http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=111&encProdID= vWvb5gNEReM%3D&DivisionID=65&isArchived=0_ (http://www.yaesu.c; /archives//html/Yaesu/2007-03/msg00020.html (7,704 bytes)
14. [Yaesu] Solar Panel (score: 1): Author: K5XS@aol.com; Date: Thu, 22 Mar 2007 18:44:12 EDT; To go with my FT-897D, I have picked up a 12 watt (12 volts and 1 amp) solar charger. I am hoping to use it to charge my batteries. But looking at the Yaesu CD-24 Rapid Charger, I see it needs 13.8V; /archives//html/Yaesu/2007-03/msg00023.html (6,654 bytes)
15. Re: [Yaesu] Need Schematic for MD-1 Mic (score: 1): Author: K5XS@aol.com; Date: Wed, 19 Dec 2007 09:19:07 EST; If anyone is looking for schematics of microphones and their connectors, here is an excellent source. _http://homepage.ntlworld.com/rg4wpw/date.html_ (http://homepage.ntlworld.com/rg4wpw/date.html) 7; /archives//html/Yaesu/2007-12/msg00020.html (7,319 bytes)

Current List: 1 - 15
Page: [1]