Gentlemen, I am a newbie to WriteLog (V11.18C on a Windows 7 computer) and experiencing connectivity issues with my IC-756 Pro III. This rig communicates with several other software packages I use at
If you are using an IC-756 Pro III with WriteLog 11.18C and it successfully communicates the frequency info to the computer, could you please email me a copy of your INI file so that I can see how it
Thanks Joe for the info. My rig communicates at 19,200 so when I installed WriteLog that is the baud rate I set the Port Setup for and verified in the INI file that I have 19,200,N,8,1 It was suggest
Thanks Bob, Bottom line is I checked the items you indicate with no luck, I have a CI-V so may have to break down and install that but seems to me if the computer/rig talk now, why would the interfac
Thanks for the info Joe, I am using a third party and not the CI-V from Icom. This interface works between the rig and computer for all other software packages I run and no issues. The CW is a K1EL W
Thanks again Joe, Did as you wrote here to the "letter" but no joy. I don't consider myself inept and worked on electronic controllers, networking, writing programs, etc in my profession for years an
Et Al, Thank-you for all the responses, I remember how frustrating it was troubleshooting issues via long distance in my job sometimes with folks ill prepared for the task. Ugh Nothing like being in
Well I have to say thanks to all who supported me and put up with my frustration(too many to name here but you know who you are), I now have WriteLog communicating with my rig AND showing the frequen
_______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writelog WriteLog on the web: http://www.writelog.com/