I have been running MMTTY for several years including 1.62 & 1.63 on dual processor machine (450MHz P-IIs) with Win2K. without trouble. Steve Holton N1nB
I assume your doing AFSK How are you doing PTT?? Via rig control? or via The com port that goes to your rigblaster and is also specified in the rttyrite window port tab for the MMTTY plugin?? (you sp
Help! Needless to say I'm a procrastinator, now I'm trying to get soundcard DVK running for ARRL DX tonight...... The problem I am having is combining letters/spaces with numbers/slash/question and r
Needless to say it dawned on me what might (and turned out to be ) the problem. I boldly claimed in the previous msg... "I have recorded the letters, numbers and /?and space under the same conditions
Going Hunting Don?? The rules as they appear today at both the CQ and New RTYY journal say that for mults for the 2002 contest are:.... X. Multipliers: One multiplier point for each US state (48) and
That's correct, if and only if, what's in your Cabrillo file, in particular the QTH column, is in agreement with what the log checking is using for recognizing as valid mults. The latest mult file fo
Jim, Not exactly correct Writelog emits both State for USA and "Area" for Canada, and "DX" for all others in it's Cabrillo file. Both U.S. State and Canadian "area" are required to determine mults. L
Tell it it's a Kenwood. I just completed the RS/232 interface on my K2 and did simple experiment with WL to verify that the K2 was working. It tracked the VFO just fine. The Elecraft documentation sa
I'm building one right now. In part because of it reputation as a receiver. Below find a couple of snippets from the QST review. If you go to their website www.elecraft.com you'll find the complete
I have recently added a HAL DXP38 with the aim to have it as second receive demodulator in addition to MMTTY which I run in FSK mode to get easy access to the narrow filters on my FT1000MP MkV. I ran
Further to my long lament... I'm running WL 10.30B on both Win98 and Win2K. I did have 10.28D on Win98 and tried that briefly. As I recall it was even less satisfactory and was the source of most the
Writelog behaved itself very well in the RU - never crashed or locked up but I did observe a few problems/features: The biggest problem was found when hitting ESC to abort transmission (often because
One of the problems that may be causing confusion in the way ALt-K behaves is that it varies with where the focus is in the Writelog-Rttyrite windows. And here the use of the term "focus" is really m
After 4 years off I'm back and trying to learn Writelog fast enough for ANARTS this weekend. I'm using 10.26B. I can't seem to find how to enter time off - help says "scroll to the QSO where you want
When in doubt "RTFM" which I didn't - but I was unable to find them during the contest by searching the help - guess next time I should always study "what's new" carefully ;<( . There are several oth