I did a search in the Writelog archive. Does the following answer the question? ** For autosave, WL only offers one configuration option: you can tell it the maximum number of QSOs that can be in the
Eric: Thats exactly what I did when I had my Kachina running via remote control I used a laptop for rig control and had it connected to my main pc which was running writelog. It worked great. I made
Is anyone using an Icom rig with the IC-2KL amp? If you are how do you handle rig control. After doing some research I'm under the impression that the serial connection on the back of my 756pro will
Joe: When I went to XP I had the same problem. I am now using a serial port for cw keying which works great. You should have no problem using your soundcard as a voice keyer.
BlankIs there a keep alive function in Writelog packet? I just changed = my router/firewall and I'm having to ping every 30 seconds to stay = active. Or do I need to use dxtelnet. Its a fine program
I'm using an interface made by K1NU http://home.att.net/~k1nu/k1nu/Products/index.html Its built into a DB9 hood and works very well. The price at $29 plus $3 shipping isn't too bad. I have no connec
I agree. Send the number. As a CW challenged operator if I heard A N T, I would reply how high is it :-). -- Richard Thorne Advo Companies, Inc. 806-342-0600
I agree. Send the number. As a CW challenged operator if I heard A N T, I would reply how high is it :-). -- Richard Thorne Advo Companies, Inc. 806-342-0600
BlankHello Group: I installed a LinkSys router here at home and that installation has = caused me to loose my telnet connection within a few minutes. Since it = appears that WL does not have a keep a
Frank: Writelog already supports the Texas QSO party. Just remember to check the option that you are either 'In Texas' or 'Outside of Texas'. -- Richard Thorne Advo Companies, Inc. 806-342-0600
Tony: You'll get lots of answers on this one. I am using a SIIG 4 port card along with the 2 on board ports for a total of 6. The SIIG card works well and it was easy to install on both Win98 and XP.
BlankHello Group: I decided to get the ol' solder iron out and build up a quick circuit to = use FSK with my 756pro. When the rig is keyed I only get a solid = carrier, no tones. Now the the circuit
I solved my problem, it was a bad 2n2222 transistor. BlankHello Group: I decided to get the ol' solder iron out and build up a quick circuit to use FSK with my 756pro. When the rig is keyed I only ge
BlankI built the simple FSK circuit using a resistor and NPN transistor = connected to a 9 pin com port. It worked very well on the on-board = built in com port. It also works on the SIIG 4 port seri
Mike: I've been using the home version of XP with no problems. However, don't plan on using the parallel port, its not supported in XP. There is a driver out there to make it work but I think its muc
Peter: Get a 2 to 1 stereo adapter at Radioshack. Plug it into the the rig and then plug your writelog cable into one side and your external keyer into the other side. -- Richard Thorne Advo Companie