Hi All, I just purchased WriteLog. I am trying to set it up with my FT-2000. I have my serial cable connected and I can poll the rig. No problem there. When I try to use any of the "F" keys, the PTT
Hi Gary and the group. Here is what I have for WL. I have my FT-2000 connected through a straight through Serial Cable on COM 1. I have the radio Selected as FT-2000 and the Computer port set to auto
Hi Marsh, That must be my problem. I have Com 1 connected to the FT-2000 CAT port and that part works fine. I was under the impression that I could send CW through the same cable but apparently that
I think I have it figured out. It appears I need to place a small transistor on the DTR line from the Com port to the keying jack. By doing that, i should be able to do everything from the same port.
Ok, That was the FIX. I installed a 5k resistor from pin 4 on the serial cable to the Base of a NTE-123A transistor. I then connected the Emitter to pin 5 ( ground). In did not cut the wires in the S
Hi John, The LPT port has Nothing connected to it. It is the COM port that is doing the keying and sending the PTT. I have it figured out now. Thanks, Gordon N6WK ____________________________________
/Hi John, I read in the MMTTY setup this info: /When you begin to set things up, remember that you need to consider how to control PTT while you consider how to generate the AFSK/FSK signal. This is
Cort, I am using Windows Vista Ultimate which is 64 bit and WriteLog is working fine on it. My Computer is a Pentium 4 3.0ghz Dual Core with 4 gigs of RAM Hope that helps answer your question. 73, Go
Hi John, I just discovered something amazing. Although I had to build a small Circuit to Key the radio using WriteLog for CW, I do not have to do it for RTTY FSK. All I have connected from my Compute
When I open up the RTTY box from inside WL, I get an error message that says USERPARA.INI, and some weird letters after it. I click OK, and everything still seems to work . Can anyone let me know wha
The documents in Vista are stored in c:\users\yourname\documents If you did a new install of vista over your old operating system, it should have saved all your old files in a folder called Windows.o
Jess, I am running Vista Ultimate and the MTTY plug in works fine with my write log. I don't recall doing anything special to make it work. Gordon N6WK _______________________________________________
Irwin, I run Writelog on my Vista Ultimate computer with no problems that I am aware of. I do not run my Writelog networked though, even though all my other computers (3) are running XP Pro and all f
Ric, The nice thing about Vista Ultimate is that it will run in the "Side by Side" mode, meaning, it will run 32 bit or 64 bit Applications. I have not run the Home version 64 bit, so I am not sure i
Hi Guys, How can I unsubscribe from this list for now? Thanks, Gordon N6WK _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/ma