I can also generate the MFC error a second way ... this time with the "administrator" account. If you have damaged userpara.ini and allowed MMTTY to create a NEW one and enable "Show Profile Panel" i
John, Did you set a port number in the RTTYrite menu? The port is passed to MMTTY on start-up. If you change the port number you will need to restart (reselect) MMTTY. 73, ... Joe, W4TV _____________
Nels, 1) Open the RTTY Window and click "ignore" on the userepara.ini error popup. 2) When the MMTTY plug-in opens click on "Profiles(S)" in the "RTTY Control Panel" menu. 3) Click on "MMTTY default"
Thanks to help from AA5AU and AL9A, Dave Bernstein AA6YQ has duplicated at least one cause of the the UserPara.ini pop-up error. The error pop-up messages are in Japanese (even though they may not ap
Permissions in Vista are a real can of worms. There are explicit permissions assigned to a given file, permissions assigned to a directory, and permissions inherited from a directory's parent, In ad
Zrinko, Writelog locks the software interface for the IC-736 to CI-V address 40h. You will either need to change the address in your IC-738 from 44h to 40h (see page 35 of the IC-736/738 manual) or e
This is normal with the new WriteLog audio interface. Dismiss the error message (it occurs because the mic input is active) and proceed. You have a configuration mismatch between WriteLog and Router
Gary, Do you have "SC PTT" checked on the PTT tab in microHAM Router? If so turn it off. I have no problem using The current version of Writelog just as in prior versions with the single "microHAM CO
Yes - http://groups.yahoo.com/group/microHAM No, most of them have been WriteLog configuration issues - there is no support for application specific problems on the microHAM list. 73, ... Joe Subich
With Vista and Windows 7, when an application switches inputs the unselected input is "not available." However, unless one is recording a DVK message, I don't understand how the unavailability of th
Wayne, Your experience duplicates mine in both Windows 7/64 and Vista/64. As long as I have installed MMTTY in D:\Ham Programs\MMTTY and D:\Ham Programs\MMTTY_2 I have never seen an error except when
Gary, Is the WriteLog mixer configured for microHAM CODEC output? Is Writelog (RTTYrite) configured for Stereo Sound Board AFSK? Is the radio assigned to the LEFT channel (or Sound Board AFSK and onl
What are you using for an interface? Are you using FSK or AFSK? Are you using a hardware serial port or a USB to serial converter? MMTTY always generates PTT on both the RTS and DTR lines of the port
You have five options for PTT (in order of best to worst): 1) connect a PTT interface (resistor/transistor) to the RTS (or DTR) line of the FSK port 2) leave the WinKey connected/configured and use
That should not be happening. What is your rig setting in both WriteLog and Router (CAT | Set | Radio)? Router should detect any of the -D modes as digital and automatically select the digital routi
WriteLog help file ... [RIGS] ... see information on overrides. 73, ... Joe, W4TV _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting
It appears that WriteLog is probably not polling for or controlling the data mode (LSB-D1, etc.) on either the 7600 or 7800. Since I don't have either, I can't dig any deeper. From looking at the man
Rob, Your symptoms sound as if WriteLog is not in the correct mode and would not be related to using the microHAM interface/software. Double check your radio set-up, the mode supported in the "contes
microKEYER II does not support any rotor functions. You would be better served to get a RotorEZ board and a simple USB to serial adapter for the G2800DXC than to add a Station Master *only* for rotor
Bill, When was the MMTTY plug-in installed (what version of WriteLog)? The only suggestion I can come up with is to uninstall the MMTTY plug-in from the Windows Control Panel, edit the writelog.ini f