- 261. Re: [WriteLog] AFSK and a PTT Port? (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Sat, 20 Apr 2013 20:41:45 -0400
- I must use AFSK with the Flex and because of the NET issue I really don't want 2Tone in control of the transmitter. NET is not a significant issue with 2Tone ... 2Tone is a completely different parad
- /archives//html/WriteLog/2013-04/msg00140.html (10,009 bytes)
- 262. Re: [WriteLog] 11.11C & XMMT (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Sun, 21 Apr 2013 08:54:20 -0400
- Yes, MMTTY can run either using the "old" SM6SRW plug-in or "new" XMMT.ocx interface and 2Tone can run in a "clone" window - (File | Clone (Receive only)) in the Rttyrite menu. 73, ... Joe, W4TV ____
- /archives//html/WriteLog/2013-04/msg00153.html (7,870 bytes)
- 263. Re: [WriteLog] 11.11C & XMMT (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Sun, 21 Apr 2013 12:34:25 -0400
- AFSK pacing with 2Tone is very good. Wayne made a special effort just before release of 11.11 to make AFSK more accurate. The primary issue is with FSK and those problems are primarily due to bufferi
- /archives//html/WriteLog/2013-04/msg00158.html (8,786 bytes)
- 264. Re: [WriteLog] can't open RTTYrite window (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Wed, 24 Apr 2013 19:27:29 -0400
- This would indicate there has been a significant problem with your configuration for quite some time. As a guess, I would uninstall completely *and* uninstall the SM6SRW MMTTY plug-in for Writelog (
- /archives//html/WriteLog/2013-04/msg00164.html (9,313 bytes)
- 265. Re: [WriteLog] [RTTY] 75 baud question (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Wed, 24 Apr 2013 20:02:45 -0400
- TS-850 has a separate RCA jack (marked RTTY) for FSK input. Constant level receive audio is available on pin 3 of ACC2 (the 13 pin DIN) with return ("ground" on pin 4). PTT for RTTY/FSK is available
- /archives//html/WriteLog/2013-04/msg00165.html (8,555 bytes)
- 266. Re: [WriteLog] BARTG 75 setup (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Wed, 24 Apr 2013 22:41:29 -0400
- So unless I am missing something here, when using the XMMT.ocx interface it will not be possible to achieve 75 baud unless you use Hardware generated FSK. But Hardware generated FSK with XMMT.ocx wil
- /archives//html/WriteLog/2013-04/msg00174.html (9,590 bytes)
- 267. Re: [WriteLog] BARTG 75 setup (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Wed, 24 Apr 2013 22:51:17 -0400
- On 4/24/2013 10:39 PM, Don AA5AU wrote: MMTTY via XMMT.ocx does work but the transmit buffering is such that the characters do not go out as they are typed if transmitting live at the keyboard. When
- /archives//html/WriteLog/2013-04/msg00175.html (8,648 bytes)
- 268. Re: [WriteLog] BARTG 75 setup (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Thu, 25 Apr 2013 02:35:06 -0400
- In the second clone window running XMMT.ocx and MMTTY with the AA6YQ profile I have set the Mode to 75 baud in RttyRite and in its MMTTY instance. However, the decoding in this clone window is still
- /archives//html/WriteLog/2013-04/msg00177.html (13,034 bytes)
- 269. Re: [WriteLog] BARTG 75 setup (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Thu, 25 Apr 2013 23:49:19 -0400
- Recall the AA6YQ profile, modify it as you need then save the modified profile to an open slot (Profile(S) | Assign Menu) ... 73, ... Joe, W4TV On 4/25/2013 8:44 PM, Gary AL9A wrote: Ok Joe, you've h
- /archives//html/WriteLog/2013-04/msg00180.html (15,330 bytes)
- 270. Re: [WriteLog] BARTG 75 setup (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Fri, 26 Apr 2013 17:07:26 -0400
- Did you not reset the data rate? Remember, recalling a profile sets the data rate (data rate is stored in the profile) so you will need to reset it before it will decode 75 baud. 73, ... Joe, W4TV On
- /archives//html/WriteLog/2013-04/msg00188.html (9,111 bytes)
- 271. Re: [WriteLog] Fw: RTTY PPT delay (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Sat, 27 Apr 2013 17:57:39 -0400
- I see no difference in PTT lead/tail times with either the SM6SRW MMTTY plugin for Writelog or WriteLog's XMMT.ocx support. What are your WinKey Lead/Lag times in Router? WriteLog's XMMT.ocx support
- /archives//html/WriteLog/2013-04/msg00193.html (10,456 bytes)
- 272. Re: [WriteLog] RTTY PPT delay (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Mon, 29 Apr 2013 20:15:42 -0400
- Gary, Are you sure you don't have WriteLog also sending PTT commands via CAT? That is *notorious* for causing PTT problems - late release in particular. It also appears that Writelog may have some is
- /archives//html/WriteLog/2013-04/msg00208.html (17,175 bytes)
- 273. Re: [WriteLog] RTTY PPT delay (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Mon, 29 Apr 2013 20:18:47 -0400
- Jerry, Flex Radio's PowerSDR is notorious for software latency ... I would give up COMM PTT entirely and forget about VAC. Treat the box as if it were a conventional radio and use the analog PTT/audi
- /archives//html/WriteLog/2013-04/msg00209.html (17,797 bytes)
- 274. Re: [WriteLog] RTTY PPT delay (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Mon, 29 Apr 2013 22:11:22 -0400
- I have checked, double checked, triple checked, ad nauseam, and am sure the WriteLog PTT command for my IC-7600 is set to NO. Make sure there is no port set for "Radio Command" in MMTTY. One other th
- /archives//html/WriteLog/2013-04/msg00211.html (19,414 bytes)
- 275. Re: [WriteLog] RTTY PPT delay (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Tue, 30 Apr 2013 14:54:29 -0400
- If you select CW on a COM port, WriteLog will put PTT signals on the same port on its RTS output. This is for all modes, not just CW, and this PTT signal is in addition to any that WriteLog might pu
- /archives//html/WriteLog/2013-04/msg00214.html (23,829 bytes)
- 276. Re: [WriteLog] LPT on 64 bit OS? (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Fri, 03 May 2013 21:21:37 -0400
- Due to the hardware abstraction layer in "modern" versions of Windows (Windows 2000 and later), a kernel mode or "ring 0" driver is required for memory/port mapped I/O. WriteLog has typically used di
- /archives//html/WriteLog/2013-05/msg00007.html (14,285 bytes)
- 277. Re: [WriteLog] LPT on 64 bit OS? (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Sat, 04 May 2013 00:22:25 -0400
- As was explained to me the support was discontinued as WIN7 does not support native LPT ports. That's not true. Windows 7 (and Windows 8) - both 32/64 bit versions support native parallel ports. I ha
- /archives//html/WriteLog/2013-05/msg00009.html (13,398 bytes)
- 278. Re: [WriteLog] question (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Sun, 26 May 2013 19:27:48 -0400
- *UNCHECK* "Sound card PTT" on the PTT tab in Router. The sound card is not being closed as soon as the wave file end - you have either recorded a "tail" or the logging software is adding a tail. 73,
- /archives//html/WriteLog/2013-05/msg00052.html (8,470 bytes)
- 279. Re: [WriteLog] question (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Sun, 26 May 2013 19:47:06 -0400
- Missed that this was CW ... confirm 1) COMM PTT is *NO* in WriteLog's ports set-up 2) you have no PTT port in Router's Ports tab (PTT comes from WinKey). 3) PTT Tail, PA PTT Tail, and LNA PTT Tail *i
- /archives//html/WriteLog/2013-05/msg00053.html (8,923 bytes)
- 280. Re: [WriteLog] SO2R audio switching option from keyboard ?? (score: 1)
- Author: "Joe Subich, W4TV" <lists@subich.com>
- Date: Sat, 06 Jul 2013 15:14:09 -0400
- You are asking a question for which there is no simple answer. The solution depends on - your understanding of your transceiver: (is SSB monitor and CW QSK generated in the left ear, right ear or bot
- /archives//html/WriteLog/2013-07/msg00016.html (14,429 bytes)
This search system is powered by
Namazu