Select mark "reverse" in the FT-1000MP menu - specific menu item is in the manual. 73, ... Joe, W4TV _______________________________________________ WriteLog mailing list WriteLog@contesting.com htt
The typical causes of "no DVK audio on transmit" are: 1) failing to set a PTT 2) routing audio to an inactive input (line in SSB, mic in AFSK) 3) being in the "wrong" part of the band if frequency de
Unless "Headset Earphone - microHAM CODEC" is selected as the Windows Default Device for Output (which it should not be), the application (WriteLog, in this case) should be able to set the mode as ne
I'd suggest capturing the CAT log for your K3 port when communication between WriteLog and the K3/MK2R is not correct and sending it to support@microHAM.com for review if you can't see the issue ther
That is a result of WriteLog 11.01 using different registry settings. I suspect that other third party packages (third party contests, etc.) may also need to be reloaded although I have not confirmed
Yes, the "CAT Communications Log" shows all communication between applications and the rig. Please forward any logs you have taken during the time WriteLog is displaying "no rig" along with screen s
Specify the port in the *RTTYrite* menu then reselect MMTTY as the TU. The port is passed to the plug-in when the plug-in is initialized. 73, ... Joe, W4TV ___________________________________________
Original Digikeyer or DigiKeyer II? Please see the example configuration for DigiKeyer/DigiKeyer II from "Help | Download Documents" in microHAM Router or online at: www.microHAM-USA.com/support.html
Connect the hardware PTT (VOX) from SignaLink to the PKS pin (pin 9) of the ACC2 connector and disable COMM PTT (software command PTT) in RTTY. The TS-2000 (and other recent Kenwood transceivers) req
Jim, Actually SignaLink USB generates PTT based on the presence of audio and that is connected to the ACC jack when using the Signalink cable. WriteLog's software PTT activates the mic jack rather th
Don, That's to be expected as most radios begin producing RF as soon as PTT is engaged in FSK mode - or with minimal internal delay. While it may not be an issue when operating with no amplifier or u
Ron, I specifically referenced microKEYER II and DigiKeyer II as having the ability to key an amplifier and/or LNA (receive antenna switching devices) before the transceiver. That feature us not avai
Incorrect ... MMTTY does not transmit "Letters" with every space in strings of spaces. "Letters" (or unshift) is transmitted before the first space in a string. Three spaces and CR/LF is six charact
Use Packet mode in the FT-950 (connect AFSK to the DATA jack) and adjust menu 054 DATA PKTDSP to -2125 (assuming you use PKT-L and 2125/2295 Hz tones). If you are using tones other than 2125/2295 adj
What operating system are you using? If it is Windows XP you can use two LPT ports and some BCD to one of 10 decoders to control the bandpass filters using Writelog's "Antenna Relay" interface. With
TS-870 should work with a standard serial cable. By default the TS-870 requires handshake on RTS/CTS so make sure you have not set anything in WRITELOG.INI that will prevent proper operation of RTS.
If you select "stereo", WriteLog needs to be in two radio (or 2 VFO) mode. The left channel will be the audio/radio assigned as the left radio (connected to the left channel/tip of the sound board)
Rick, Do you have "Command PTT" (software command) enabled? If so, disable it and use hardware PTT (RTS). You are most likely triggering the K3 "race" condition which results in a hang when using har
It's in the menus: with WriteLog set for *one radio*, select Window If number of radios is > 1, the option is disabled (gray). 73, ... Joe, W4TV _______________________________________________ WriteL
Nope, this a case of hardware capabilities. If your sound card has the ability to perform an analog connection between the mic input and Line output you will have no delay. However, if your sound ca