If WriteLog does not contain a definition for the IC-7700 add the following to the [RIGS] section of writelog.ini: Icom IC-7700=0x74 See the Writelog help file and K9JY's Writelog user site www.k9jy.
MMTTY 1.66F works just fine with WriteLog and the MMTTY plug-in. Simply point Writelog to the MMTTY 1.66F after installing the plug-in or copy MMTTY.EXE 1.66F over the old version. 73, ... Joe, W4TV
You can't. That is a function of the plug-in. However, if you need the EXTFSK (USB - RS-232 adapter that does not support 45 baud), enable the "Software FSK" settings (either "Software generated FSK
WinKeyer2 is WKUSB and the new serial WinKeyer 2. WinKeyer 2 is the new 16 pin Winkey IC that K1EL uses in his retail keyers and kits instead of the original 8 pin Winkey IC. The original WinKey IC
Configuration guides for WriteLog with all of the microHAM interfaces are available using the "Download Documents" link in microHAM Router or from the files section at the microHAM users' list on Yah
MMTTY is being used as a plug-in and does not have keyboard access (you can't use F9 to "press" the TX button). Data to MMTTY in the plug-in state must come from the controlling program (WriteLog).
I checked the beta versions of MMTTY 1.66 with the WriteLog plug-in for Dave. There are no issues, simply copy the new MMTTY.exe file over your old one (or rename the old one to keep it). The only ad
WriteLog Soundboard Mixer Control ... record to PC and Mixer Controls settings (device). 73, ... Joe, W4TV _______________________________________________ WriteLog mailing list WriteLog@contesting.co
microHAM Router does not block any data between the radio and WriteLog. The Omni VII has two CAT modes - one is "native" the other is a modified mode that supports SteppIR antennas and the CT logging
It's only grayed out if CW Keyer type is NOT PC Generates. With the external keyers (W5XD, PK-232, WinKey, MK2R+) all mode PTT is enabled all the time (and controlled by the external keyer configura
Is your Omni VII configured for standard Omni VII protocol or for the hybrid "CT/SteppIR" operation (is "Serial IF" Omni-VII or SteppIR/CT)? If Serial IF = SteppIR/CT the modes are reported in Orion
Check the setting for soundboard type (mono or stereo) in Writelog and check your "rec to PC" source in Writelog Sound Mixer Level Control. The CW source is not specified in the MMTTY plug-in set-up.
Steve, See the set-up guides in the files area at: http://groups.yahoo.com/group/microHAM or via the "download documents" link in Router's Help menu. 73, ... Joe, W4TV _______________________________
Yes, you will need some kind of driver for CW and either a second serial port or the LPT because the TS-570 needs the RS-232 handshake lines (RTS/CTS). Information on the driver circuits are in the W
When WriteLog starts, Does Router show "open 4800 8N2" in the CAT port? If not, WriteLog is not opening the correct port. I do not believe there should be a space between COM5: and =4800. Have you t
Wolf, I can not duplicate your problems. After getting my FT-2000 out of storage, it works exactly as expected (no problems) with Router 7.2.2 and Writelog 10.69D. Data communications parameters are
Not necessary at all ... 1) Install two copies of MMTTY in two separate directories. 2) Start WriteLog, select radio -> number of radios -> 2 3) select the first radio, click on Radio -> This window
Rob, The specific question was whether it was possible to do SO2R with one sound card and the answer is yes. The soundcard has two inputs ... left channel and right channel. One channel is used for e
Yes, it works under Vista assuming User Account Control is tuned off so WriteLog and the MMTTY plug-in works properly. Windows 98 has been out of support by Microsoft for more than two years. By now
The new update for microHAM Router - version 7.6.0 is now available via the "update Router" link within Router, from www.microHAM-USA.com/downloads.html or www.microHAM.com. Significant changes inclu