Hi all, I have recently changed my rig and I am not able anymore to get the CW Display (CW decoder) working; simply I do not get any signal there. Setup: IC-7300 MKII Writelog 12.20D WL works perfect
Hi Wayne, thanks for your recommendations. In the meanwhile I made a check in the reflector and found a message from Don AA5AU on January 13, 2016 that explains how to set up WL in order to get the p
Hi all, I am trying to configure the IC-7300 and Writelog in order to add spectrum and waterfall to the Band Map. I think that it should work (IF out of the IC-7300 USB port -> IQ Source..), but unfo
Hi all, I run WL 12.26 on Windows 10 and have the following issue relevant to the Red Box in the entry windows when using %C in CW. - If I press the F key the Red Box appears and I can correct/comple
Hi all, I run WL 12.26 on Windows 10 and have the following issue relevant to the Red Box in the entry windows when using %C in CW. - If I press the F key the Red Box appears and I can correct/comple
Hi all Has anyone suceeded in setting up Writelog with the IC-7300 to show the spectrum on the WL BandMap (as we easily can do on N1MM+ and Dxlab)? Thanks! Alessandro, i2sva _________________________
Hi, the question is the following: ** with WL version 11 and earlier ** - If I press the F key the Red Box appears and I can correct/complete the call on the fly - If I press Enter (having set Enter=
I have a similar issue here: - WL 12.35C - WL UDP Listener - WSJT 2.0.0-rc5 - O/S Windows 10 Running UDP listener (normal or as administrator does not make any difference): - Listening on UDP Port 23
Hi all, I am still frozen with the issue that QSO logged in WSJT do not flow into Writelog. Am I the only one in the World with such issue? Anyone can help diagnose? Thanks in advance. SW in use: Wri
Don, UDP Broadcast is enabled "Enable logged contact ADIF broadcast" is checked IP Address 127.0.0.1, port 2333 As a matter of fact the ADIF string is moved from WSJT-X to UDP Listener. The issue is
Hi all, I am trying to set up Digirite (1.1.23) and Writelog (12.42G) with Icom IC-7300. The IC-7300 must be set to USB-D mode when using FT4/8. My issue is that when Digirite moves to TX it always s
Hi Alan, I found exactly the same issue on my 900+ QSO log. ARRL does not recognize 4 multipliers out of 174 total. The problem is that the robot does not highlight where is the issue is or which are
Prince Edward Island must be PEI. PE is not recognized as a multiplier 73 Alessandro - I2SVA Hi Alan, I found exactly the same issue on my 900+ QSO log. ARRL does not recognize 4 multipliers out of 1
Hi all + Writelog Support, anyone using Writelog 12.48 or 12.49 and SDRPlay RSPduo? I have configured the SDR tab as follows: (IQ provided by ExtIO) > Setup: Tunable SDR > Rig on COMM5 > Select ExtIO
Hi guys, is there any clear document or tutorial explaining how to operate Flex 6000 and Writelog together? The Writelog WLFLEXDRIVERREADME it's a bit messy and does not clearly cover all the aspects
Hi all, I am trying to configure RTTY on WL 12.68H together with Flex 6400 (v3.3.33) on a Windows 10 pc. FlexRadio 12.61b driver is installed and WL is properly configured. MMTTY and 2Tones instances
Hi Kevin, thanks for the suggestion, all is set accordingly If i run MMTTY alone it works well, RX and TX, no problema t all. The issue is present only when opening MMTTY and/or 2Tones from Writelog
Hi Don, yes, that's done. As a matter of fact if I shut down the RTTY window(s) and open the CW window it shows the same white noise but, if teh CW signal is strong and clear, does some decode. .. Al
Hi Bob, thanks for the crystal clear procedure to set up the application. Now WL works well both in RTTY and in CW. The issue originated in (9) where I had: Slice A > to DAX Audio RX1. It would be gr
Hi, I see the release note of WL 12.73 in the website but the last downloadable file is 12.72, is that correct? Thanks, 73 Alessandro i2sva _______________________________________________ WriteLog ma