Hi guys, apparently it was a little late last night when I replied to Jochen's Email. The new rule is already built into the current module, only I forgot. What you have to do to set it up as a fixed
Hi guys, did anybody have any success with an external USB Soundcard? My notebook only has a Mic-In and no line-in, so it is basically useless for decoding RTTY and other stuff. I have searched the a
Hi guys, thanks for all the replies, helping to get the Mic-in working. Unfortunately this is not an option. It is Mono-only, so no SO2R and the input level cannot be adjusted very well, the AGC cann
Yes it does, because the Speed on the left of the ">" is greater than on the right, which is perfectly correct. 73 Carsten DL1EFD "Bruce Meier" <n1ln@consolidated.net> schrieb am 16.02.05 02:14:15: _
Rick, I use a T41p but no LPT1 (un)fortunately. The report you got from the user is probably because of a different mode for the LPT port. Do you have the ThinkPad Configuration program in the "Acces
I had the same happening with KG4OX who showed a Beam Heading for W4. Not much difference from here, but any idea where to change it? 73 Carsten, DL1EFD K4SB <k4sb@bellsouth.net> schrieb am 27.09.05
Hi Mike! Werner is correct on the STF format. I can also confirm that there is a problem with the WAG from DX module when you enter a 000 as the report - this is a new rule that I didn't implement. I
Hello group! Is there a shortcut to copy the last hightlighted Callsign to the Entry Window just like the Insert key does? INS works fine for calling CQ, but when S&Ping I'd like to have the same fea
Hi guys, Using WL 10.60 I have a problem entering Multipliers for YR Stations, e.g. YR1Z. WL will say Unknown Mult and not accept valid Mult "AG" (or anything else). I tried playing with [YOCOUNTIES-
OK, thanks for the Workaround. I did it a little differently - logged the call as YO1Z and changed it to YR1Z after logging. That works as well. I was looking for a real fix though:-) 73 Carsten, DL1
Hi Barry, What is between the %B%B will be sent when you press the key on a Dupe. So with nothing in between, it will not send anything for a Dupe. (You will only call non-Dupes in S&P) 73 Carsten, D
Jerry, Just use Start->Control Panel->Add/Remove Programs as for any other software. You'll find them under "DL1EFD Contest Modules for W5XD's Writelog". 73 Carsten, DL1EFD __________________________
Doesn't the "Home" key do just that? 73 Carsten, DL1EFD _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writ
Dale, Not exactly what you want but if you use the %X macro at the beginning of your CQ message, you only have to hit F1. (You have to have hit Shift-up/down once to get the TX focus on the CQ radio
Kelly, rename your current writelog.ini to something else and start (and close) Writelog. It will create a new writelog.ini with default settings. (I'm not sure if you will need to reregister) 73 Car
Jerry, I haven't followed the discussion, but if this was a new DLL for a contest, you will need to copy it into the Writelog\Programs directory and then Start->Run and enter: regsvr32.exe "X:\PathTo
Leo, If you have used my Writelog module for logging WAG, you can export to STF by going to Contest->Create DARC *.STF file. 73 Carsten, M/DL1EFD _______________________________________________ Write
Have you tried minimizing the Telnet window (and everything else for that matter)? I seem to remember having this problem when there was the "connect" dialog box behind the telnet window waiting for
Hi, Can anybody recommend a 2 (or more) port RS232 adaptor for ExpressCard/34 that works under Windows 7 64bit? I am going to get a new laptop and need to replace my PCMCIA serial adaptor. 73 Carsten
Joe, To install my modules (and other modules) go to Start->All path to my module installer and click on Run Installer... Then follow the instructions by the installer as usual. Finally click Cancel