Yes the fact that Windows permits multiple keyboards would be the way WL can offer the multi keyboard functions. It is quite simple. Just plug multiple keyboards into your PC. Then you can assig
Did you find anything? I am having the same issue Thanks Rich Suggestions? Jim W4LC _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contes
Thanks Don, I have 12.11.06 and it is still not right. The multiplier window even shows the wrong MULTS for SP stations which is why the entry window will not accept the provinces. I just reinstall
I have my INI file setup up to send numbers only. I am still sending cut numbers. Is there another setting I am missing? Rich K3RWN _______________________________________________ WriteLog mailing
I am not a fan of them either. I imported the proper INI file using the WL IMPORT. Then loaded CQWPX CW module. I still send cut numbers Typos sent by my iphone ______________________________________
I believe if you have multiple keyboards and assign them to the entry windows using CTRL/SHIFT click , Then the keyboard will change the focus to the correct radio. I use this plenty in RTTY. I h
Then my comment about 99.9% of the time. Is probably in error. It is being caused by me. Thanks, Wayne On 6/11/2020 15:12 PM, Wayne, W5XD wrote: -a) if I call spotted station with Left keyboard - Le
You did not mention the radio you are using nor the hardware interface to key CW. In WL the Comport for FSK RTTY is selected in RTTYrite. The Comport for CW keying is selected in "PORTS". The same
I should have said........... Some of the newer radios with USB can key CW via DTR or RTS on that port without the need for a hardware interface for keying In WL the Comport for FSK RTTY is selected
I would be glad to help if I can. I run my SO2R with Writelog, two radios, two keyboards and one PC, but frankly I know nothing about Navigator, Rich I'm not familiar with the Navigator but I do hav
I have been using WL for longer than I can remember. I have never seen/had this issue with the RATE window before. I typically have the rate window set to display ALL bands. During the WAE RTTY
Maybe I am missing something regarding the QTC messages. I use the Shifted/Func Keys for my QTC messages. As spelled out by AA5AU @ RTTYcontesting.com. The messages are very easy to edit on the
I did have this issue during the NAQP Rtty. All I did was restart the program and the issue went away. Probably not much help as they probably already did a restart Rich K3RWN He can right-click an
Are there NAQP Prefill files available somewhere for WL? My searches have come up empty Thanks Rich _______________________________________________ WriteLog mailing list WriteLog@contesting.com http:
I found it in an old email. Thanks to those who take the time to prepare this data Rich My searches have come up empty Thanks Rich _______________________________________________ WriteLog mailing lis
I assume you are referring to the fact you have a period after the "a" Open your .ini file with notepad and search for Wa. Change it to WA and save the ini file. You should be able to change it vi
I noticed during the CQ WW 160 test that the F1 key is no longer available in the CW/RTTY/SSB messages. Is this by design? That reduces the number of available F-Keys by one. Rich K3RWN _____________
Thanks. I do remember that F1 and F11 were the same but F1 still appeared in the list of F-Keys. Now it is gone. As long as what I put in F11 is activated by the F1 key I am good. Rich CW and RTTY a
I do not believe there is a 9 pin din on the radio. There should be either one 13 pin jack or an 8pin and a 7 pin. Icom has used the same wiring forever. The FSK should be on Pin 1 of the 8pin ja
Not sure that this can cause your issue, but do you have PC Generates selected as CW Keyer under WL Ports? Rich The thing isit transmits fine. It just transmits dits, no dahs. Sending 5NN results in