Bands were flat and noisy but participation seemed real good with plenty of FN20 ops. I lost 3 and 10ghz but all other bands running good to 2.3ghz. Best distance was on 2m to KD8UD in FM17 in VA. 73
Hi Less, Type in Google "wireless code practice oscillator" and you will find a ton of various types. Here is the one you are probably looking for made by Lafayette (LRE) http://www.n4mw.com/cp029.ht
I agree with Ken that I too never saw any discussion on this. I am VERY disappointed with the decision especially as I just spent a lot of money last year to get on 10 ghz and was amazed at the great
Another concern we should be aware of is our UHF frequencies comingunder attack by Cellular Carriers. I heard that there is movement to use the 5ghz band. Verizon and maybe others are building Micro
Gents, I guess there are 2 Steve's working on 222 beacons at the same time. I have 3 beacons on the air and the newest is on 222.060 listed with .25w which is now 5w to a wheel at 480' hmsl. Here is
The K1IIG beacons in FN31NL will be off during the contest being located at my home and will be back on Monday. Thanks for your understanding. None are locked and measured this Friday morning. 222.06
I am looking for a 10-20 solid state amp for 10ghz. I have up to 2w of drive from a Demi. Also, appreciate if someone has a suggestion where to buy one. FYI, I will be going to our local NEWS picnic
Hey guys, Wow the Kuhne if I converted correct is over 2k. I can not seem to find a contact of DL2AM. Steve _______________________________________________ VHFcontesting mailing list VHFcontesting@co
Tnx guys I will try and contact all of them. Of course I have heard of Kuhne and all good. Terry I think Henry K1TJ has a contact for DL2AM. Buddy, I like the Kirk Fischer site easy to view in Englis
HELLO DAVE AND OTHERS, As I type I am vacationing in FN51 in S. Wellfleet walking distance from the Marconi site. I have been coming here for 15 years yet never operated a contest although I usually
I appreciate all that the ARRL is doing to keep amateur radio alive and well. I am in agreement with W1SZ and others that the Petition post is inappropriate on this reflector. If the amateur is not h
I hope to get on from Cape Cod in FN-51 a somewhat rare grid. I will have 100w on 6m to a 200' HF dipole 60' high. When the band is open I hear a lot of DX so might have some luck. 2m will be a HUGE
Hi Patrick and George, George has given you a good suggestion using a house bracketed tower. Try and find a Rohn45 which is much stronger and will support a lot more without guys but of course more c
Tree attenuation has been studied quite a bit. I am on vaca but I do have an old 2way radio paper on this from Motorola which is great with simple answers and examples. The main factor is the type of
The K1IIG beacon in FN-31NL on 2304.324 is off the air during repairs. AT&T has launched a 2ghz band and is receiving on 2305-2314mhz and transmitting somewhere on 1700mhz. Apparently I have a spur o
I spoke with Dave, W3KM and asked why he does not do kilometer calculations on 10ghz in his VHF Logger program. He explained that he does it in the Gen log which unfortunately the display does not fi
Hello All, Due to some repairs my 2ghz beacon on 2304.324 was taken off the air. It is back on with a new frequency and higher power. It is now on 2304.320 with 25w or 150w ERP to a 2x12 Alford slot
The K1IIG FN-31NL Beacons on 222.060, 432.320 and 2304.320 will be off during the contest due to the proximity to my contest station. 73's and GL in the contest Steve K1IIG __________________________
FOR SALE: 50' Rohn 25 in good condition with no rust 3' top section with rotor plate and thrust bearing mounted inc a 6' mast installed. House Bracket included 5 sets of new unopened Rohn25 Leg bolts
After contacting a couple of hams in England I found that Kent, WA5VJB has some of the G4HUP Pat buffer boards. He had a complete IF buffer board for my TS-2000 for $25. He also has a bunch of kits.