- 1. [TowerTalk] replacing relay (score: 1)
- Author: "Les" <lkemble@charter.net>
- Date: Mon, 18 Oct 2004 16:22:37 -0400
- Does anyone know of an easy way to unsolder a relay from a Amertron RCS-4? Les _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless W
- /archives//html/Towertalk/2004-10/msg00512.html (6,533 bytes)
- 2. Re: [TowerTalk] replacing relay (score: 1)
- Author: "W3YY" <w3yy@cox.net>
- Date: Wed, 20 Oct 2004 23:32:31 -0000
- Les - Are you familiar with solder wick? This is used to suck up any excess solder from a solder point. If you have multiple points that need to be unsoldered to release a component, this is the way
- /archives//html/Towertalk/2004-10/msg00537.html (8,152 bytes)
- 3. RE: [TowerTalk] replacing relay (score: 1)
- Author: "W7TMT" <w7tmt@dayshaw.net>
- Date: Wed, 20 Oct 2004 17:48:57 -0700
- In addition, don't overlook a tool called the "Solder Sucker" - at least that's the name of one the one I have. It's basically a small squeeze bulb type device with a small plastic tip. You heat the
- /archives//html/Towertalk/2004-10/msg00539.html (8,236 bytes)
- 4. RE: [TowerTalk] replacing relay (score: 1)
- Author: gdaught6@stanford.edu
- Date: Wed, 20 Oct 2004 18:47:09 -0700
- A medium sized "ear syringe" and about an inch of 1/8" teflon tubing will also work. It has for me, anyhow, since about 1962. 73, George T. Daughters, K6GT ___________________________________________
- /archives//html/Towertalk/2004-10/msg00540.html (7,816 bytes)
- 5. Re: [TowerTalk] replacing relay (score: 1)
- Author: Jamesnf@aol.com
- Date: Wed, 20 Oct 2004 21:49:04 EDT
- Real Hams just pucker up, bend over and suck that darn solder out of the hole! Jim W9TM _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "W
- /archives//html/Towertalk/2004-10/msg00541.html (7,153 bytes)
- 6. RE: [TowerTalk] replacing relay (score: 1)
- Author: "Keith Dutson" <kjdutson@earthlink.net>
- Date: Wed, 20 Oct 2004 22:14:44 -0500
- I have a Paladin solder sucker. It is far more effective than any other method I have used, including the wicking braid. But, the easiest method may be a heat gun. It works well for circuit boards th
- /archives//html/Towertalk/2004-10/msg00542.html (10,095 bytes)
- 7. Re: [TowerTalk] replacing relay (score: 1)
- Author: "Tom Rauch" <w8ji@contesting.com>
- Date: Wed, 20 Oct 2004 23:43:44 -0400
- By far the best way to replace open frame relays in the RCS-4 is to simply break the relay base apart, and then unsolder the lugs one at a time. You can break the relays apart by carefully using SHAR
- /archives//html/Towertalk/2004-10/msg00543.html (8,021 bytes)
This search system is powered by
Namazu