Since I started erecting my tower I have requested advice from this group and received excellent guidance. Now the tower is up and I need advice on how to rout the coax on a crack Up Tower. When lowe
I used a set of coax standoff arms for my 89' crankup. I have an RG-8 sized feedline for each of 6 antennas plus a rotator cable and a control cable for an 80 meter switch box. I taped the cable bund
I have a 55ft US Tower with the coax support arms. I know some people anchor the coax at each support arm, but then the coax forms loops with a small radius, probably smaller than is good for it. I c
Just let the cable bundle hang from the top and let it "pile up" on the ground. Forget the stand-offs at each section. At VE6WZ I have the US tower HDX-589 crankup and at the top is a 3 foot stand-of
and received excellent guidance. You came to the right place! how to rout the coax on a crack Up Tower. When lowering the tower what is the neatest and safest way to route the coax so that when exten
A Big Thank you to everyone for their inputs. I will make good use of your ideas and see what I can set up for my installation and hopefully report back. Thanks Again! Marinus Willemstijn Since I sta