Hi guys, I am rebuilding the station and as we put the new antenas up I have the problem in the video down the link. Does anyone have had this issue ? The rotator turns it just gets stuck at the disp
I'd change the pot in the bottom of the rotator itself.. Prosistel aren't as big as you think.. http://gd0tep.com/pst61/PST61.htm 73 Andy http://gd0tep.com Hi guys, I am rebuilding the station and as
Filipi maybe is the pot, but contact prosistel and show this Prosistel is one of the best rotators, PST61D is very powerful. 73. Jorge CX6VM/CW5W -- 73, Jorge CX6VM/CW5W _____________________________
Author: Rudy Bakalov via TowerTalk <towertalk@contesting.com>
Date: Sun, 14 Aug 2016 16:29:16 -0400
The video is consistent with my experience with damaged pots. It has been a 4-year saga with the PST61D. It is rated at 36 sq.ft of wind load, but in practice this rating is just a wishful thinking.
Hi again I got a few direct replies and most of the indicate that the pot on the rotator is dead. For info this PST61 is up for more than 12 years and the only thing that failed once was the capacito
It would be a good rotator if the bolts connecting the housing halves would not shear off long before the specs are reached. 73 Peter,DJ7WW --Original Message-- From: TowerTalk [mailto:towertalk-boun
The idea of the Prosistel is a good one, its just built to a price, and in some places it shows. The PST61 of mine that failed, was due the FOUR tiny metal machine screws that hold the rotator onto
Author: "Roger (K8RI) on TT" <K8RI-on-TowerTalk@tm.net>
Date: Sun, 14 Aug 2016 23:04:07 -0400
He is referring to the PST61, not the D version. (old or new versions? New uses a DC motor) They look the same and I believe have the same internal parts, but with a different motor. For the internal