- 1. [TowerTalk] Prop Pitch Bevel Gear (score: 1)
- Author: w7gj@bigskyspaces.com (Lance Collister)
- Date: Thu, 23 Aug 2001 13:30:00 -0600
- I have a medium size prop pitch (about 9" or 10" in diameter) with a 4" diameter (to the outside of the splines) splined output drive cylinder with 40 teeth/splines. The beveled gear that normally fi
- /archives//html/Towertalk/2001-08/msg00550.html (8,733 bytes)
- 2. [TowerTalk] Prop Pitch Bevel Gear (score: 1)
- Author: mfarrer@tality.com (Mel Farrer)
- Date: Thu, 23 Aug 2001 12:49:49 -0700
- I found a 3/4" pitch chain drive sprocket for the PP and another for the mast then side mounted the PP and used a stainless chain to drive. Worked great. Caution, don't let it have any slack in the c
- /archives//html/Towertalk/2001-08/msg00551.html (9,794 bytes)
- 3. [TowerTalk] Prop Pitch Bevel Gear (score: 1)
- Author: gm3poi@btinternet.com (Clive GM3POI)
- Date: Fri, 24 Aug 2001 08:10:45 -0000
- Lance be careful that the splined o/p shaft has not been distorted by the welding the bevel gear fits with a very fine tolerance. My bevel gear was rusted on so I ended up cutting it off removing the
- /archives//html/Towertalk/2001-08/msg00571.html (11,981 bytes)
- 4. [TowerTalk] Prop Pitch Bevel Gear (score: 1)
- Author: K7LXC@aol.com (K7LXC@aol.com)
- Date: Fri, 24 Aug 2001 09:54:18 EDT
- M2 has them - I think they're a hundred bucks. Talk to Matt Stahl for more details. 559-432-7388. They also do PP mods to add their digital controller - it works pretty slick. Cheers, Steve K7LXC To
- /archives//html/Towertalk/2001-08/msg00576.html (7,498 bytes)
This search system is powered by
Namazu