My second M2 Orion 2800 generates quite a bit of RF noise as it turns. It is an older unit. I understand there is some filtering in the newer units. I'd like to resolve this before this weekend. Has
How newer? My orion is a year old and it generates noise. Matt W5LL -- Original Message -- From: "Jim Idelson" <k1ir@designet.com> To: "TowerTalk Post" <towertalk@contesting.com> Sent: Wednesday, Nov
Mine is a few years old and is a big noise generator, too - especially on 6m. The noise comes from the reed relay rapidly pulsing a static 5VDC source while the rotor turns - essentially a small spar
My OR-2800 is seven years old but this past June I had the control head upgraded to the newer control board. With that change I started noticing noise in my receiver when the rotator is turning where
Stan...Let me know what you find...I just upgraded my 2800 as well and noticed the same thing. Thanks... Rich N7TR My OR-2800 is seven years old but this past June I had the control head upgraded to
I have a M2 Orion and yes it is realy a rf nois generator.This one is used for the multiplier antenna.But I got another problem.He still loose the correct heading.I'f I calibrate it it is in the corr
Marc, I have two Orion 2800 rotators that have operated very reliably for me for the past 7 years. One rotator is 120 meters from my ham shack and the other rotator is over 200 meters from my shack.
Hi to TT, Anyone using the 2800DC rotator MUST use a separate line for the reed switch. I believe this should be coax as suggested by M2. However, M2 suggests it could be necessary for really long ru