Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TowerTalk\]\s+Loose\s+Rotator\s+Bolts\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TowerTalk\]\s+Loose\s+Rotator\s+Bolts\s*$/: 7 ]

Total 7 documents matching your query.

1. [TowerTalk] Loose Rotator Bolts (score: 1): Author: wa3uum@juno.com (Matt T Powell); Date: Sun, 18 Oct 1998 12:01:32 -0500; Hi, Has anyone experienced rotator / plate mounting bolts loosening up, to the point of falling out ? I have had 2 cases of this happening, which were discovered this weekend. Both rotators were T2X'; /archives//html/Towertalk/1998-10/msg00583.html (8,315 bytes)
2. [TowerTalk] Loose Rotator Bolts (score: 1): Author: n7cl@mmsi.com (Eric Gustafson); Date: Sun, 18 Oct 1998 10:39:07 -0700; Matt, Although now that the holes are greased, it is probably too late for this, you may have been much better off with "Service Removable" (usually blue) Loctite instead of the grease on the threads; /archives//html/Towertalk/1998-10/msg00584.html (8,687 bytes)
3. [TowerTalk] Loose Rotator Bolts (score: 1): Author: ni6w@yagistress.minden.nv.us (Kurt Andress); Date: Sun, 18 Oct 1998 10:53:17 -0700; Hi Matt, All hardware in an antenna system is subject to loosening due to vibration caused by the wind. Get rid of the split and star washers and use a thread locking compound like Loctite. For stain; /archives//html/Towertalk/1998-10/msg00586.html (9,117 bytes)
4. [TowerTalk] Loose Rotator Bolts (score: 1): Author: K7LXC@aol.com (K7LXC@aol.com); Date: Sun, 18 Oct 1998 14:24:46 EDT; << Has anyone experienced rotator / plate mounting bolts loosening up, to the point of falling out ? I have had 2 cases of this happening, which were discovered this weekend. the other turns a stack; /archives//html/Towertalk/1998-10/msg00588.html (8,419 bytes)
5. [TowerTalk] Loose Rotator Bolts (score: 1): Author: w8ik@ibm.net (Joe Subich, W8IK); Date: Sun, 18 Oct 1998 16:30:30 -0400; Was fairly common for me to find lose base (mounting) bolts on my T2X rotors back in the Columbus, OH area. QTH was on a flat land with a 200' drop off from southeast through north into a river vall; /archives//html/Towertalk/1998-10/msg00593.html (8,204 bytes)
6. [TowerTalk] Loose Rotator Bolts (score: 1): Author: wf3h@enter.net (bob puharic); Date: Sun, 18 Oct 1998 22:47:26 +0000; you bet...have seen this on my own ham iv rotator...one bolt was, literally, hanging on by a thread.! guess you gotta tighten 'em up occasionally. probably gets loose from rotator torque. -- FAQ on W; /archives//html/Towertalk/1998-10/msg00598.html (8,311 bytes)
7. [TowerTalk] Loose Rotator Bolts (score: 1): Author: w7ni@teleport.com (Stan Griffiths); Date: Sun, 18 Oct 1998 20:17:19 -0700; Hi Matt, I suspect you have some misalignment in the rotator system. I also think you can probably fix it by loosening up the rotator mast clamp bolts, the rotator to shelf bolts, and the shelf ubolt; /archives//html/Towertalk/1998-10/msg00621.html (10,111 bytes)

Current List: 1 - 7
Page: [1]