Author: FERNANDO MUGUERZA VIDEGARAY <xe2fl.kf5mn@gmail.com>
Date: Sun, 16 Dec 2018 00:06:32 -0600
I checked in one spec of the T2X rotor and says can drive pipes up to 2-1/8, so the shims should be 1/16 each for a 2 pipe. Also check if rotor base is centered on the towers base. Fernando,XE2FL Fer
I believe the maximum mast size a TX2 rotor will accept is 2 1/16" not 2 1/8". Julio, W4HY I checked in one spec of the T2X rotor and says can drive pipes up to 2-1/8, so the shims should be 1/16 eac
l looked it up in the manual. The T2X manual says maximum mast diameter is 2 1/16" 73,BobK6UJ Julio, W4HY I checked in one spec of the T2X rotor and says can drive pipes up to 2-1/8, so the shims sh
At least my T2X manual says 2 1/16. It must be right because I use 1/32 shims with my 2 mast and all is perfect. Now for an embarrassing admission: I was ignorant of this for nearly 20 years and coul
Good evening This is Norm's wife, N3YKF. He just passed away and each time I get one of this e mails, it hurts so bad. Please, I can not find how to unsuscribe him Can you help me? https://www.hefune
I wonder why Hy-Gain designed their rotators for a Ĝ2.062 mast. 2" DOM runs close to size, no more than Ĝ2.006 and galvanizing might add another .003/ side. John KK9A l looked it up in the manual. Th
John, I was wondering the same thing. My mast is 2" DOM, galvanized. I can see the need for a shim if using a water pipe, 1.9" OD. Perhaps they factored in the possibility of extra paint thicknes