- 1. [TowerTalk] C4 Delivered on Kauai (score: 1)
- Author: jreid@aloha.net (Jim Reid)
- Date: Mon, 4 Jan 1999 15:03:24 -1000
- Aloha, UPS brought the C4 just before a cheese sandwich this noon. After sandwich, unpacked all into neat little stacks; each of the 8 elements laid out in order to soon be riveted together, with the
- /archives//html/Towertalk/1999-01/msg00087.html (9,811 bytes)
- 2. [TowerTalk] C4 Delivered on Kauai (score: 1)
- Author: otterstad@inet.uni2.dk (Ragnar Otterstad)
- Date: Tue, 5 Jan 1999 10:19:22 +0100
- I have painted my Magnum 20/30/40 with spray paint, which I bought at a filling stations. This is the paint you use to shine up your car ! So far it has been up 2.5 years without any problems. Paint
- /archives//html/Towertalk/1999-01/msg00098.html (8,253 bytes)
- 3. [TowerTalk] C4 Delivered on Kauai (score: 1)
- Author: gehring@alaska.net (Steve Gehring, KL7DC)
- Date: Tue, 05 Jan 1999 01:35:44 -0800
- Hi, I painted a 10 mtr monoband yagi with an acrylic clear coat in the early 90's while living on the Mississippi gulf coast, specifically back bay of Biloxi. After 3 years of gulf weather, the anten
- /archives//html/Towertalk/1999-01/msg00100.html (9,244 bytes)
- 4. [TowerTalk] C4 Delivered on Kauai (score: 1)
- Author: JSheinb785@aol.com (JSheinb785@aol.com)
- Date: Tue, 5 Jan 1999 20:45:45 EST
- I have expounded on this before, but I'll reiterate. In 1981 or 82 I put 3 aluminum antennas up on my 55 ft. tower. I coated them with X-I-M 900, a clear metal primer. Last week I took them down in a
- /archives//html/Towertalk/1999-01/msg00107.html (8,319 bytes)
- 5. [TowerTalk] C4 Delivered on Kauai (score: 1)
- Author: Clive Penna" <clive@gm3poi.prestel.co.uk (Clive Penna)
- Date: Wed, 6 Jan 1999 10:24:42 -0000
- Hi Jim, I have painted a number of antennas. You need to do the following first assemble it before the painting. Obtain from a specialist paint supplier an aluminium type etch primer, that stuff drie
- /archives//html/Towertalk/1999-01/msg00109.html (8,900 bytes)
- 6. [TowerTalk] C4 Delivered on Kauai (score: 1)
- Author: K7LXC@aol.com (K7LXC@aol.com)
- Date: Wed, 6 Jan 1999 10:21:36 EST
- For aluminum and steel hardware, I suspect most paints can be applied directly to everything. DO NOT paint the Lexan KLM element clamps. The paint WILL react with the Lexan and result in fatal cracki
- /archives//html/Towertalk/1999-01/msg00114.html (8,449 bytes)
- 7. [TowerTalk] C4 Delivered on Kauai (score: 1)
- Author: DAVED@ctilidar.com (Dave D'Epagnier)
- Date: Wed, 6 Jan 1999 08:47:47 -0700
- Jim, I painted my C3S so it would be a bit camoflaged here amongst the evergreens at my Colorado QTH. Painted my entire tower too. I found that painting with a brush was painfully slow. What ended up
- /archives//html/Towertalk/1999-01/msg00115.html (8,231 bytes)
- 8. [TowerTalk] C4 Delivered on Kauai (score: 1)
- Author: K7LXC@aol.com (K7LXC@aol.com)
- Date: Wed, 6 Jan 1999 12:09:04 EST
- If you are going to paint a tower, antenna or anything that has lots of small surfaces, the best thing to use is a paint mitt. You just put it on, dip it in the bucket and grab the surfaces with up/d
- /archives//html/Towertalk/1999-01/msg00117.html (8,695 bytes)
- 9. [TowerTalk] C4 Delivered on Kauai (score: 1)
- Author: DAVED@ctilidar.com (Dave D'Epagnier)
- Date: Wed, 6 Jan 1999 10:22:04 -0700
- That's what Tom at Force 12 recommended I use. I bought one but couldn't bring myself to dip my whole hand into a paint bucket. It seemed like I'd end up creating a god awful mess. Tom told me to ma
- /archives//html/Towertalk/1999-01/msg00118.html (8,728 bytes)
- 10. [TowerTalk] C4 Delivered on Kauai (score: 1)
- Author: n7cl@mmsi.com (Eric Gustafson)
- Date: Wed, 6 Jan 1999 10:47:44 -0700
- To: <towertalk@contesting.com> I would like to add to this that you should be VERY careful about approaching lexan or any polycarbonate plastic with ANY volatile hydrocarbon solvent or paint/adhesiv
- /archives//html/Towertalk/1999-01/msg00120.html (9,505 bytes)
This search system is powered by
Namazu