HI Mates, I just acquired an older unused LM354-HD crank-up tower. Looking for a Mass. PE who can review and provide a stamp on the drawing. Any advice on who can provide the service in MA? Thank you
Does anyone have a Tashjian tower stamped by MA PE? If you do, what is the name of this PE? The tower I got is the same as Tashjian LM354 HD. Thanks, Alex, WK1O ______________________________________
RigExpert has *All Parameters Mode* when it will display the R, X and the Resonant Frequency. This is the most useful screen for tuning an antenna. You can move up and down the frequency to see R and
Hi Mates, We made a huge error and poured the concrete for the base of LM 354 HD without covering the galvanized legs and then did not clean it of concrete immediately. Now the concrete got stuck rea
Thank you all for your feedback. I appreciate many quick suggestions. We were able to clean it up using: 1. 3100 PSI Pressure Washer . 2000 PSI was not strong enough. 2. Fine grade Steel Wool - after
I am looking for antenna and installation advice. I am looking to install a tri-bander 10-15-20 on the side of the self-supporting 80 ft Trylon tower at around 35 ft above ground level to stack with
Hi John, Thank you for your reply. The height of the antenna mount should be around 40 ft or so to be a compromised distance for 10,15 and 20m. Building two identical yagi does not look like an optio
I would like to install a second large fixed direction yagi on the Trylon Super Titan self supporting 70 ft tower. There is a large SP7GXP , 200 lb yagi installed at the top of the tower on the mast.
I talked to them 4 years ago when I was looking for a self supporting tower. Back then they told me they were no longer manufacturing ham radio stuff but the government only. So, I went with Trylon.
Greetings, I am looking for a source of 20-22 ft chromoly mast 2 inch. My mast urgently needs to be replaced as it got bent during the tilting of the tower. DX Engineering offers it but can ship in 3
Hi Tim, Thank you. I called DX Engineering and talked to a sales person. Your guys promised to get back to me with more info about delivery. Best, Alex, WK1O _________________________________________