Good Morning Assorted Tower Talkers: I am getting ready to finish my new tower installation, the rotor i have is somewhat of a mystery rotor, that was given to me by a friend, and i was wondering if
Cool - thanks for all the advice and links to the manual - -it looks at this point like it will do what i need quite nicely -- the load will be fairly light and is as follows: 1 - 5 element arrow ant
Hi folks: about 2 weeks or so ago, you folks helped me identify my CDE TR44 series 3 rotor and controller, i found the new cap that it looked like it needed and replaced it, hooked everything up care
Hi folks: I have a TR-44 Rotator and controller that has been working well but has been a slight bit off since i installed it - the needle would stop b4 it reached the end of its rotation on CCW and
Hi folks; Thanks for the advice on my lagging needle -- it turns out the endpoint adjustments were REALLY screwed up -- i tweaked it out and the unit is now working properly TIM -- Tim Holmes W8TAH -
Hi folks: Im in the process of designing a new antenna for my HF station- im planning to use ladder line to feed it, with 80 and 40 m wires about 1 foot apart i posted all my mmana stuff on my websit
Hi folks: Im in the final design stages of my new dipole for home -- the current plan is for an 80m dipole fed with window line -- im still refining my modeling, but right now im looking at between 1
Hi folks: Ive got a very very effective 30/40/80 dipole fed with window line that i absolutly love - however one probelm about every week or so i have to go outside and put the ends of the ladder lin
Hi folks: i have a solar panel from an older davis weather station -- its about 16x10 inches, and as of a few minutes ago puts out about 20 volts in full sun. I also have the charging widget and 12 v
Hi folks: I have a rotor and controller labled as follows CDR-Rotor Model tr44 By: Cornell-Dubilier Electronics Division Federal Pacific Electric Company Fuquay-Varina N.C. Series 3 735 Use with TR44
Hi guys -- i just got new windows in my apartment and now i can construct a passthrough panel for all my cables to keep the COLD!!! out the F/F coax connectors are no problem the rotor cables ( 2 x 4
A couple months back someone posted a link to a company that makes long barrel connectors for coax (the normal kind not the funky UHF Kind) ive lost the link -- can someone please repost? TIM -- Tim
First off - -this is NOT an invitation to start a flame war, or do discuss the technical/legal/moral/spiritual etc merits of the use (and abuse) of dx telnet clusters -- each of us has our own views
Hi Folks: I have a 135 foot dipole at about 50 - 55 feet that is fed with windowline. The window line is connected to a 4:1 balun which in turn is connected to the tuner in the shack*. The antenna wo
Hi folks: i have 2 dipoles -- a 80m wire dipole fed with window line -- right now it has a 4:1 balun on it - and is being fed with my AT200PRO tuner -- is this correct or should it have a 1:1 (as som
Hi folks; Couple weeks back, someone posted a link of information on how to seal the end of coax when im attaching it to my rotatable dipole -- i currently have the coax wound and taped as a choke, a