Gerry and all, L-COM is located in No. Andover, Ma. They have an extremely good line of "Connectivity Products." You can get more info at " L-com.com " or for toll free Ordering and Technical Support
Over the last few years questions have been raised regarding the whereabouts and repairs for the VBI-360. If anyone has questions regarding repairs and upgrades there is help. Please contact me direc
I've always wondered why that when a simple LC tuned circuit is used in our transceivers and other electronic gadgets its loss is not mentioned, but once one of these is placed in an antenna radiatin
I used a Fluke 80T-150U temperature probe, connected to a Fluke handheld DVM to measure temperature. All measurements are in degrees Fahrenheit. During the experiments, I measured temperature at thre
It appears that your measurements from the pot in the rotor to the controller are correct, but the signals from the pot through the ADC and associated circuitry to the LED readout appears to be the r
Just wanted to let those interested know that I have available the 6 pin (White) connector & pins for the Yaesu rotor for the controller end of the rotor cable. Contact me off line for further info;
jari, Try the following "magnetic" approach used by VK5ZAI. http://www.electric-web.org/rotary_encoder.htm 73s Tom W3FRG _______________________________________________ ______________________________
I have available the white 6 pin (jst) OEM replacement connector for the Yaesu controller and controller cable. Good for replacements and making cable extensions. I have an ad posted on the eHam clas
For those interested, I have available the connector available for the Yaesu Rotor control cable input. This also fits the Kenwood Auto Tune and the Turbo Tuner as well, only the pins are changed. Gr
Anyone here using the AEA CIA-HF analyzer? Contact me off line if you are at: w3frg1 at gmail.com Tnx Tom W3FRG _______________________________________________ _______________________________________
Barry, I sent you a copy of the G-1000DXA Manual with a good clean schematic. If you need any replacement connectors for the control cable, either end, let me know. 73s Tom __________________________
Bob, Try http://sss-mag.com/smith.html Its but just one site and you can also find many sites by using Google as well. Been using the SC from the early '60s, but today its all on the PC and uW instru
Mike, For the G-450 A, I have both connectors available. The round 6 pin to rotor and the rect 6 pin to controller. Contact me off line at: w3frg1 at gmail dot com Tom W3FRG _________________________
PstRotator is set up to handle multiple rotors. Ref page 34 of the Operating manual. To create multiple instances, just go to Help / Create Multiple Instances. GL Tom W3FRG __________________________
Best to contact Codrut, YO3DMU for your specific needs. He is always very open to new and exciting tasks. GL Tom W3FRG _______________________________________________ ________________________________
Regarding the use of multiple rotors, Codrut YO3DMU, has modified his PstRotator Pgm to include the master/Slave for multiple rotors. I believe this will perform the task desired when using a stack.
I response to the many requests, I have replacement OEM cable connectors for Yaesu Antenna Rotors & Controllers. Yaesu models:G-450A, 650A, 800A, SA, DXA, 1000A, SA, DXA, 2800DXA, 5500 and many more.
In response to the original Yaesu rotor controller Cinch Jones type plug/socket where one blade is turned 90 degrees, Yeasu had these specially made. There are no replacements or substitutes. Once Ya
I have seen a lot of comments go by here on TT just how good these Glen Martin products are. This one has served me well. With that in mind, I available a Glen Martin RT-936, 9Ft Roof Tower. It inclu