Jim, The following is a summary of my recent experience eliminating BC interference on 160 m! I am using a K9AY loop for receiving on 80 & 160 m. I have a preamp in the RX line between the loop and m
All, I'm looking for assistance in identifying a 3 element triband (10, 15 & 20 m) antenna. I have not found any identification or marks on the antenna. I have included a link to photos of the instal
All, First, I've received many responses both to the list and directly. I want to thank all of you for your efforts. I was asked to add some photos of the driven element and feedline connections. Tho
All, I have positively identified this antenna. It is a Hustler 3-TBA. At least two responses I received indicated the antenna was a Hustler brand. I contacted New-Tronics and their tech support prov
Dave, I recently rebuilt one of these hub city gear boxes. I used the seals recommended by Matt and they fit properly. Robie AJ4F _______________________________________________ _____________________
Brad, A local ham uses an attic antenna. His is a approx 100' wire fed in the center with ladder line to a tuner. He keeps the wire as far away from metal as possible (other wires, AC ducts, pipes, e
Dave, I believe a version of the Rohn fold over tower is still available. https://www.rohnnet.com/towers-foldover https://www.dxengineering.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyw
Mark, I've not implemented what you are planning. In my opinion you must take any phase shift created by the chokes into consideration. If you create the chokes by placing ferrite beads on the coax y