The other half of this operation (3 star) just reopened in Orlando. Sold his building in Kissimmee. Lots of networking/telco/catv/off air tv/tower. He said that the listed # for the old shop rings th
Try to turn the rotator all the way round, from inside the shack, regardless of what the meter says. Does it really rotate 360? If so, odds are K3NG's code needs to be tweaked. Default is 450 degrees
Have an 11kW AC array. Three individual strings of 14. No RFI. Took Jim's advice and used IMC conduit. Overview here: https://www.youtube.com/watch?v=sZp7xqP6F7k _____________________________________
Forgot to mention that there are videos of the 20M band listening with a 10M dipole right under the arrays: https://www.youtube.com/watch?v=n7zCSf280XI And 50' away (or so).: https://www.youtube.com/
How well does it produce? Average 50kw per day. https://www.flickr.com/photos/n3ykf/30774099190/in/dateposted/ _______________________________________________ ________________________________________
Hi all! Working on making a circularly polarized UHF yagi. They are mounted to the same boom, orthogonal, but at a small distance, not a half wave. Pic here: https://www.flickr.com/photos/n3ykf/34924
Terry, IIRC, the Rohn literature specifies 40' bare tower as the max height for tilt up. A Hazer (or the like) could then be used. Simplifies antenna maintainance. I tilted up 20' with a mid size sat
Bought an Anritsu S113b on the bay. Total with new battery, OSL cal kit and charger was less than $500. Uses a serial port/null modem for pc data. 517 data points. Loads of bells and whistles I.E.: a
Maximo, Did you find the find the windows software? Most of the values you're seeking could be derived using Master Sweep Tools. https://www.anritsu.com/en-US/test-measurement/support/downloads/softw
Hi all! Considering purchase of a "tower on wheels". They are mechinal/pneumatic extendable towers, nesting at 6-10' extending to 60' Looking for one on a trailer, with a Will-Burt style locking mast
Is you VNA supported by Line sweep tools (Anritsu freebie)? That software has a conversion utility from S11. Have an S113b that works great. Wouldn't trade it unless I got a new one. Norm n3ykf _____
Hi, Looking for total 300'. Two pieces 150' each would work. Coax size is negotiable. Prefer real Andrew I'm in Binghamton, NY. Prefer coax in the northeast someplace. Norm n3ykf ____________________
Hi all! Playing with my toys. Using an Anritsu S113b which does not have direct voltmeter readout. These numbers were calculated by making a return loss measurement and converting it to relative phas
Jim, Thank you for your time. Reference plane was a pair of connectors added to the instrument. Like this: N Female on instrument. Added: N male to N male, N female to SMA female. Calibration was per
Good evening This is Norm's wife, N3YKF. He just passed away and each time I get one of this e mails, it hurts so bad. Please, I can not find how to unsuscribe him Can you help me? https://www.hefune