Nope, still needs a user name and password It's news to be that one has to be registered to view 'public' pictures on Flickr. Here is an alternative locatin for the gallery: Try this http://www.me.co
Yes, JB Weld is truly wonderful. A while back I managed to break the aluminum cooling fan off the motor for my swimming pool pump while changing the bearings. All that was left on the armature shaft
Some months ago I asked questions about installing a LM-470 and replacing an MA-40. There were a couple of people that asked me to let them know if the MA-40 was for sale, I had a computer problem si
Me to, I would be worried that that with the weight of the tower and concrete, the fill below the concrete pour would compact over time and become unlevel at the least and at the worst...........? Mi
Why, does it make you smarter then?? Passing a test Sending and receiving at 12wpm in the UK and receiving 20wpm in the USA did not do anything for me, I am just as dumb as ever! Mike I hope that all
You can purchase one from Tashjian towers for $84.00 http://www.tashtowers.com/crankup.html That is Multi-drilled for different Rotator bolt patterns. http://www.tashtowers.com/pricelist.html Mike, K
http://www.conedrive.com/iandm/approvedlubrication.pdf If it is Worm Gear Reduction then one of these AGMA #8 will do the job, if it has been a long time since you have changed the oil, I would flush
Yup, we did the same. Some almost to 40 feet with two hand ropes and a single walk rope between them with no safety harness, the only Engineer on site was the Scout Master, it is amazing we are still
Jerry, Let me know what problems you are having, I re-cabled mine and it did not take long. You do have to extend the tower out full length when horizontal to fit and adjust the pull down cable, but
Please ignore this post Jerry, I was thinking you were talking another tower. See my email direct to you and will ask my friend if he has a diagram after he re-cabled his TX-472. Mike Jerry, Let me k
Pin the Mast, ask my friend K6MCL across town about not following the instructions :-) Actually I was the guy that really suffered as I had to climb up the tower and hang of the side and use a transf
Can someone tell me the name of the material that is used to around Ground Rods to enhance its ability to ground. I was thinking that it was used to stop water from penetrating to outside walls that
Sodium Bentonite, yes that's the stuff thank you very much for the reply Pat. I kind of remembered that it was like Fuller's Earth or maybe is Fuller's Earth. Thanks again, Mike, K6BR From: Pat Thurm
Scott, You got me looking the stuff up on Wikipedia, it looks like Fullers Earth is just about the same thing, it is a clay, just depends what the main ingredient is. Actually it looks like fullers E
Yes, that's the stuff. Looks like Fullers Earth would be classed as Montmorillonite. Mike Do you mean Bentonite? Montmorillonite? Immature kitty-litter? Bill-W4BSG ___________________________________
I rebuilt a KT-36 twice, never again. Go the Steppir route, but go for a three element and get the big improvement in gain and front to back over a two element Steppir. No problems with my 3 element
Thank you for explaining the difference to me Bill, I will be using Bentonite. Mike --Original Message-- MikeDon't be confused by references to "Fullers Earth"; Bentonite and Fullers Earth behave VER
Bob, I asked this question of Karl at Tashjian Towers when I was there a few weeks ago. He told me that this is the way that it is designed to allow people to install Rotators when in the crank down
Not a good suggestion unless you want to purchase a tower, parts cables go someplace local. Mike Suggest call US Tower. --Original Message-- _______________________________________________ __________
The point of my post exactly, I would not call it unlucky, just extreme unhelpfulness. I made my mind after the same type of problem you have had and a few friends that I would never put up a US-Towe