i am thinking of moving the rotor up to the top of the top section of my TX-472. in the past few years we have been getting hit with big ice storms. with the T2X in the tower it has to be aligned pro
i am looking for a WX station that doesnt have a readout , but , has serial a output, i dont care if the serial output is RS232 , SPI , single wire etc... (actually ethernet would work great to) plea
i have been "going" to motorize my TX472 and havent really gotten around to it , well , after cranking it by hand several times over the past week i have had enough.... anyone have a motorized 472 th
Brian yep saw the same ad , i have been watching for it again.... Dan N8DCJ http://lists.contesting.com/mailman/listinfo/towertalk __________________________________ Yahoo! Music Unlimited Access ove
My Tx-472 (notice it doesnt say TX-472MDP) stays at full height most of the time. when we are supposed to get big weather or i am going to be out of time for an extended time i will crank it all the
Rob on the tx-472 and probably most or all US Towers the cable is the only thing standing between a nice looking tower/antenna system and a pile of scrap metal... ____________________________________
Gary WOW....yeah that didnt work out as planned did it..... i guess i would stick with english and let them translate it in the future... Dan N8DCJ http://lists.contesting.com/mailman/listinfo/towert
a long time ago a friend of mine took a yagi to VP9 where it was exposed to salt air , then when he left he telescoped all the elements together and left it that way until he was ready for his next v
By chance does anyone have a picture of a TX-472 or similar with something similar to a PRO-57B on top , i need a pic from a couple hundred feet away to show to my landlord to give him a better under
I haven't been following this thread , but , I have been told that the insulators are expensive.... so why not just use phylli and don't worry about it ? Dan N8DCJ ___________________________
In all honesty I would like to have my UST TX-472 with the Mosely PRO57B on top back up in the air. I had no issues working anything with that combo , it was very rare that I spent much time in any p
Sorry for the way off topic post , I decided to go through my DXCC cards and get everything up to date , but , somehow or another in four moves , they got wet and now I have a pile of unsubmitted car
Anyone have details regarding the construction and installation of a raising fixture for the TX-472. I am probably going to be re-installing the tower later this summer and figured thsi time I would
I checked Barnes and Noble and the price for the paperback version is $36..... I just checked Amazon.com and they have this book available. The only problem is that's it listed at $80. It would be ni
I asked this question several years ago and was sent a private message and cant seem to locate the message any longer , and I do not remember who it was from . Anyhow , does anyone have the construct
Ok , what is the recommended rotor cable to use for a T2X , probably about 150ft run , i am on a budget so need the biggest bang for the buck... thanks Dan p.s. the tower is a crankup _______________
Sorry if this is a duplicate , it never showed up.... see below....... Ok , what is the recommended rotor cable to use for a T2X , probably about 150ft run , i am on a budget so need the biggest bang
I have sent a couple of emails to UST asking how much the tower hold down bolts ( the 1- 1/8" ones) are for the TX-472 with no answer :-( , i also wanted to know what size the bolts are that hold the
this should answer the questions regarding NO8D... http://oldqslcards.com/no8d.pdf Dan Yep, no doubt that is why DX Engineering handles their mail order sales so well. Here is NO8D's QRZ.com listing:
A long time ago I had 40' of 25G bracketed at 13' with a TA-33 sized tri-bander and a 2 meter vertical , it worked just fine for me with no issues. Dan N8DCJ I am just about to start the installation