All Chance anchor specs can be found here: http://www.hubbellpowersystems.com/POWERTEST/literature_library/pdflib_eanch.html Tom, N4NW _______________________________________________ ________________
Mike, I received my via priority mail - It is 240 - repeat 240 pages on high gloss paper. IT is all in the way you ask I guess. 73's Tom, N4NW _______________________________________________ ________
I received the complete product catalog today via Priority Mail -- all 240 pages of it. Within the packae was a cover letter referencing the 25G buyers guide but all the towers 25-90, self-supporting
I have a TH6 and recently installed a TH7. The only difference between the two is the TH7 has an additional driven element to increase band-width. If you are only going to use it for one end of the b
I am rebuilding a Daiwa MultiTorgue Rotatator model MR-750 (aka MR-750E/PE or MR-300E. Specifically I am looking for motors and associated assemblies. Please communicate what you may have, your askin
This is a common problem with stainless steel hardware referred to as thread galling. You should have put anti-seize (on them before tightening. See details about this in the book "UP THE TOWER" or h
Get yourself the "Tower-Jack" available from: http://www.dxzone.com/cgi-bin/dir/jump2.cgi?ID=13033 and http://www.championradio.com Read about it in QST: http://www.championradio.com/images/towerjack
Hi, I was in contact with Roger just this week. While he may appear to have been out of touch the past several weeks - in fact, he told a little time to be with his family for the holidays. I am sure
This is on the PVRC reflector Dennis, May be of interest to you: Just to clear up the confusion on the W3PP tower on Tower Talk... It's 135 feet of ROHN 65G which I believe are 20 foot sections with
Just cover the boots with Butyl pond liner and you will have no UV problems - the stuff is rated for fifty years. I wrapped it about the boots on my SteppIR and no more UV issues. Tom N4NW __________
I looked on Google and found these results for lEPDM liner custom cut. http://www.pondpals.com/pond_liners/index.html I have several small yard ponds and I use 40mil EPDM. When I got my SteppIR and a
Doubtful if you will find one in a scrap yard. When I worked for the State Department and was stationed in Africa in the 80's we removed the full size log from the top of the embassy in Harare, Ziimb
In a recent application note, Bill, AA7XT gave an overview of the use of newer 3rd generation Tornado Delta coils on the Force 12 Delta-II 230/240 dual band 2 coax yagi. I am working on converting an