I currently have a Universal 16-50 (16 sq ft @ 80 MPH, 50 ft high) with about 10 sq ft of antenna on top of it (Tennadyne T8 =8, plus 1 for mast, plus 1 for coax/sloper/VHF vertical). My question is,
I have a T8 8 element LPDA on top of a 50 foot tower. That same tower also has a DX-A half sloper on it. The problem is that since the LPDA boom is electrically isolated from the tower, I don't get t
Hello Steve Chuck was the one who recommended to me to ground the coax at the top of the tower, but other local hams who've had Tennadyne LPDA's (T10's) have told me how they've noted performance deg
I have a tower mounted half-sloper, with an log periodic on top of the tower. Problem is, the log is completely insulated from the mast on the tower. Does it still work as a top hat to the tower for
Well, since it's pretty much agreed that an insulatedfrom-the-boom LPDA is NOT a good top hat for a half sloper, the next question is what is a better low-band DX antenna, an inefficient half-sloper
I have a Universal Tower, and as according to manufacturer's instructions I left the top of the base stubs open so water could flow out of the tower sections into the ground. Problem is is that my so
Hello all, Because of my "landscaping" situation, my low band antennas are pretty much limited to be 1/4 wave slopers, and the number of sloping wires I have is limited. I see people here have good t