Cummins Engine Company makes a far superior stainless steel hose clamp and it comes in several sizes. You would have to make a special trip to a Cummins parts outlet, however, not all Cummins parts s
I am finally getting a tower after hamming for 41 years!! I plan to pour cement around one tower section and use this as a base. The township requires this procedure for the building permit. My quest
This is a good question. The tower type is Rohn 45. Thanks, Ken _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations
However, they could also say that they never received the letter. Ken W8ND Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. ___________
While the topic is mast material, I have a question. I have a 15 foot piece of 1/4" thick aluminum mast. I am considering using this to come out of 50 feet of Rohn 45. I plan to put the Mosely CA-53
I have re-galvanized tower before. It certainly extends the life of the tower. If you paint over the new galvanizing, it extends the life a great deal. As for the "fitting" issue, even new tower sect
Does an 11 element 2 meter beam (horiz polarized, mounted 6-9 feet above a tribander help or hurt this "capacitor plate" theory? Thanks, Ken W8ND of Weather Stations", and lot's more. Call Toll Free,
Hello Tower Talkers, What is the accepted practice to adjust the SWR on a vertical prior to mounting it on the tower? I don't want to install the antenna, and then have to remove it for adjustment. I
The West Chester Amateur Radio Association has a Rohn SSV Tower for sale. It is 180 feet, on the ground ready for you to pick up. We have taken an inventory of the tower, and that inventory is listed