The cable is circular...it shouldn't matter. I would think that the requirement to store a certain way is for drainage possibly. _______________________________________________ ______________________
Consider a Moxon rectangle. Less space than a dipole, directivity of a 2 element beam. Light weight and easily home-brewed. Also look at some of the spider beams. A few cheap crappie poles, a hub and
Wayne, Start with something simple...such as a moxon or a 3 element 50ohm direct connect yagi. They are both simple to build and will get you on the air sooner. On that note, it can be one of the mos
It should not matter which end is connected to the tree or tower as long as they are insulated from them. Where does it make best sense for the feedline to connect and be supported? I have mine offse
Not sure how much power it could handle, I would also twist it so it doesn't flap around in the wind as much. _______________________________________________ _________________________________________
You should be able to find 1/2 and 5/8 braided nylon rope at Home Depot and Lowes. It is relatively soft and easy on the hands as well as fairly low stretch. 73, Jon KD5SFA __________________________
It does appear to be a home brew design since it looks like it was welded to the tower. 73, Jon KD5SFA _______________________________________________ _______________________________________________