David, I have 70 feet up with a Hazer and use two sets of guys. For the middle set I did not use the Torsion bar. What I did is I went to the local rigging company and had them make me up 3 ea. 1 foo
I am looking for recommendations on a crimper for installing connector on LMR 400, summer has arrived here in the northwest and I need to do a bunch of antenna work. What I am looking is a good easy
Can someone tell me where the boom to mast bracket is in relationship to the elements. In other words how close to the mast is the closest element. The reason for the question is I have a Hazer on my
Dana es all Here is what I have done. I used a Rohn thrust bearing with a 4 foot arm. I used a 4 foot length of 1 1/2 X 1 1/2 X 1/4 inch thick Al angle mounted it to two of the original mounting bolt
I have also been down this road twice from the same source. The pole that these ar on is 450 feet from my tower and then they go bad I have S9 + noise on all bands through 2 meters. The first one wen
All The cost of MINERAL OIL is somewhat high over the counter at the local drug store, you can do better by contacting your local Veterinarian. They usually have it in gallons also. Look for one that
This is not E-Bay. It looks like your are shopping this around to see if someone will pay more than it's worth. If it is for sale put a price on it and let's know how much. If it is NOT for sale plea
Chuck, I have seen limit switches added to the interfering tower legs and small plates to trip the limit switch added to the boom of antennas used on the Swinging Gate. Allen Bradley and others makes
Question: What determines the power handling of ability of a Bead Choke Balun. I am talking about the beads NOT THE COAX. Is it the length (number of beads) or the diameter?? Also, What is the right
If you are calculating you must factor in the velocity factor, some where around .8 to .9 for TV hard line. The best way I have found is to instal the cable from the antenna to the shack then check t
Peter, Replace them all, The last time I had to do it they were $.03 US. They are 3/8 (.375) inch. Look for a place that sells commercial bearings. CATS gets $.01. Art KB7WW _________________________
Why not try to locate 300 feet of 1/2 inch TV Cable (hardline) sometimes this can be had for nothing. Art KB7WW _______________________________________________ See: http://www.mscomputer.com for "Sel